Home
Главная
Clatronic
Пылесос
BS 1256
Инструкция по эксплуатации Страница: 40

Clatronic BS 1256 [40/62] English english

ENGLISH

Ill. 1

Emptying the Dust Container

• Turn the device off and

remove the mains plug from

the socket. Pull the handle

of the vacuum cleaner and

remove the dust container.

• Press the button on the side

of the container to empty its

contents.

• Then close the ﬂ ap of the

dust container again.

• Reinsert the dust container,

ensuring that it clearly clicks

into place.

Ill. 2

Ill. 3

1. Motor Protective Filter (in the

Dust Container)

Cleaning the Filter Element

Important:

Always empty the dust con-

tainer ﬁ rst before removing

the ﬁ lter element.

• Remove the dust container

(see illustration 1).

• Remove the contents of

the dust container. In order

to do this, press the button

on the dust container (see

illustration 2).

• Turn the lid (see illustration 3)

in the direction „ “ and then

lift it off, including the ﬁ lter

element.

Ill. 4

• Turn the ﬁ lter element in the

„OPEN“ direction to remove

it from the lid. Remove the

ﬁ lter element (two parts)

and clean the main ﬁ lter by

tapping out the contents and

gently brushing.

• Now replace the compon-

ents. Please then turn the

ﬁ lter element in the CLOSE

direction until it is tight.

• Place the lid on the dust

container - the

arrow is

located above the „ “ symbol

- and then turn it in the „ “

direction until it is tight.

• Every third time the dust con-

tainer is emptied, or in the

case of severe soiling, clean

the ﬁ lter by allowing water to

ﬂ ow through the ﬁ lter fabric

against the direction in which

the vacuum cleaner blows.

The dust container should

only be reinserted when it is

completely dry!

• Now place this back in position once it has completely dried!

Caution: Never wash the ﬁ lter in the washing machine,

and please do not use a hairdryer to dry it.

Ill. 5

2. Inlet ﬁ lter

• The inlet ﬁ lter is located

below the dust container

compartment. Remove the

dust container and then the

inlet ﬁ lter. Clean the inlet ﬁ lter

approximately every tenth

time the dust container is

emptied, or more frequently if

necessary.

• Please ensure that the ﬁ lter is always clean, as otherwise

air circulation cannot be guaranteed. If necessary, the ﬁ lter

can also be washed in warm water without any additives.

Place it back into place only once it is completely dry!

Ill. 6

3. Outlet ﬁ lter

• The appliance is also equip-

ped with an outlet ﬁ lter.

• In order to ensure that the

ﬁ lter works correctly, we

recommend that you replace

it every six months.

• It is located on the rear part

of your appliance behind a

ventilation grid.

• Open the ventilation grille by

pressing the lever on its side.

• Then pull the grille out towards the front. Remove the ﬁ lter

and clean as described above. Fit the ﬁ lter back into place

and close the ventilation grid by following the steps above in

the opposite order.

Important note!

• Cleaning may become necessary after a shorter time,

depending on the conditions of use, e.g. when vacuuming

ﬁ ne dust.

• If the suction power of your vacuum cleaner diminishes

please clean the ﬁ lters as described.

• If the suction power suddenly diminishes during operation

this may be due to the ﬁ lters being locked.

05-BS 1256 40 04.05.2007, 11:48:32 Uhr

Clatronic BS 1256 [40/62] English english

Содержание

Похожие устройства