Profi Cook PC-KA 1138 [36/50] Initial operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Profi Cook PC-KA 1138 [36/50] Initial operation

Profi Cook PC-KA 1138 [36/50] Initial operation
36
PC-K A1138_IM 10.03.2017
Electric Connection
1. Ensure that your mains power corresponds with the specications of
the appliance. The specications are printed on the type label.
2. There is a cable storrage at the bottom of the appliance. Unwind the
required power cord. Pass the power cord through one of the open-
ings to ensure the rm stand of the unit.
3. Connect the mains cable to a properly installed and earthed wall
outlet. The indicator light for operation lights up.
Control panel
The buttons on the appliance are multi-functional touch buttons. To select
the different functions, the corresponding button must either be briey
tapped, or pressed longer.
Coffee Beans
CAUTION:
Use only roasted coffee beans for grinding.
Raw, frozen or liquid coffee beans may damage the grinder.
Adjustment of the Coarseness Setting
The coffee grinder has got 14 different coarseness setting.
Stage 1 = nely ground (strong coffee)
Stage 14 = coarsely ground (mild coffee)
How ne or coarse you grind the coffee depends on your taste. The sort
and roasting of the coffee beans also inuence the taste. With a little
practice, you easily will nd out which coarseness setting is the right one
for you.
RECOMMENDATION:
To reach the best avour, use the amount of coffee beans you need for
one brewing process only.
Remaining Coffee Beans
Remove the coffee beans from the appliance if they are older than one
week. They maybe have lost their aroma and will reduce the avour of
your coffee.
NOTE:
Store coffee beans in a sealed, air-tight container in the refrigerator to
ensure that the coffee will keep its typical avour.
Initial Operation
Time Setting
After connecting the devise the power supply, the time will light up in the
display.
1. Tap the
h
min
button. The hours will light up.
2. Tap the
h
min
, button again, to set the current hour.
3. Conrm your setting with the
1
. button. The minutes will light up.
4. Repeat step 2 and 3 to set the current minute. Your coffee machine is
now ready for operation.
NOTE:
If you keep the
h
min
button pressed, a fast mode starts.
Switch the Appliance On and Off
• If you do not press any button for 3 minutes, the appliance switches
into standby- mode automatically. The display and all indicator lights
will turn off.
• You also can switch off the appliance manually by pressing and holding
the button for 2 seconds.
• To switch on the appliance again, press and hold the button for
2 seconds again. The time and the last program settings will be
displayed again.
Before Using the Appliance for the First Time
Before making coffee for the rst time operate the appliance twice with
clean water only and without paper lter. This removes dust, which may
have collected during transport. Follow the instructions given under the
chapter “Preparation with Coffee Powder”. Do not ll in coffee powder!
Operation
Set the Warm-Keeping Time
Set the time period you want your coffee to be kept warm after the brew-
ing process.
NOTE:
• The warm-keeping time can only be set whilst standby- mode.
• You can set any time between 5 and 40 minutes.
1. Press and hold the
2
button, until the display shows the time .
2. Use the
h
min
button to set the required warm-keeping time.
3. Conrm your setting with the
2
button. The current time is displayed
again.
Preparing the Coffee Machine
1. Close the coffee bean container.
2. Open the lid of the water tank.
3. Fill cold water according to the desired amount of cups of coffee into
the rear water tank. The water level is displayed on the indicator.
NOTE:
• You can use the pot to ll the water tank.
• Pour in only as much water as you want to brew cups. The
content of the water tank will be emptied completely during each
brewing process, regardless of the settings.
CAUTION:
Do not overll the tank! Do not ll it above the 10 mark.
4. Now close the lid of the water tank.
5. Refer to gure B on page 4! Turn over the lower fold of the paper
lter (size 1 x 4) and place it in the lter funnel. The paper lter may
not protrude over the edge of the lter holder!
6. Slide the lter holder into the appliance until it will lock in audible.
NOTE:
A safety switch prevents the start of the brewing process if the lter
holder is not inserted correctly.
7. Place the jug onto the warming plate.
CAUTION: Drip stop
Your appliance comes with a drip stop. It closes when removing the
coffee pot. This prevents the coffee from dripping onto the warming
plate if there is still water in the lter.
• Ensure that the lid is attached to the coffee pot. It opens the drip
stop.
• If there is still water in the tank, place the pot underneath as soon
as possible. Otherwise the lter might overow.
• Please also refer to the chapter “Interruption of the Brewing
Process”.
8. If you want to make your coffee with coffee powder, read the chapter
“Preparation with Coffee Powder”.
Preparation with Coffee Beans
Please follow the instructions under points “Preparing the Coffee
Machine”.
9. Open the coffee bean container.
10. Use the regulator (14) to adjust the coarseness setting.
11. Fill the desired amount of coffee beans into the grinder. The maximum
lling capacity of 150 g may not be exceeded.
12. Close the coffee bean container.

Содержание

Похожие устройства

Скачать