Hotpoint-Ariston C 34S N1 R/HA [19/36] Start up and use

Hotpoint-Ariston C 34S N1 R/HA [19/36] Start up and use
19
GB
Using the hob
Lighting the burners
For each BURNER knob there is a complete ring
showing the strength of the flame for the relevant
burner.
To light one of the burners on the hob:
1. Bring a flame or gas lighter close to the burner.
2. Press the BURNER knob and turn it in an
anticlockwise direction so that it is pointing to the
maximum flame setting -.
3. Adjust the intensity of the flame to the desired
level by turning the BURNER knob in an
anticlockwise direction. This may be the minimum
setting +, the maximum setting - or any position in
between the two.
If the appliance is fitted with
an electronic lighting device*
(see figure), press the ignition
button, marked with the
symbol XXX, then hold the
BURNER knob down and turn
it in an anticlockwise direction,
towards the maximum flame
setting, until the burner is lit. The burner may be
extinguished when the knob is released. If this
occurs, repeat the operation, holding the knob down
for a longer period of time.
If the flame is accidentally extinguished, switch off
the burner and wait for at least 1 minute before
attempting to relight it.
If the appliance is equipped with a flame failure
safety device*, press and hold the BURNER knob for
approximately 2-3 seconds to keep the flame alight
and to activate the device.
To switch the burner off, turn the knob until it reaches
the stop position .
Practical advice on
using the burners
For the burners to work in the most efficient way
possible and to save on the amount of gas
consumed, it is recommended that only pans that
have a lid and a flat base are used. They should also
be suited to the size of the burner.
To identify the type of burner, please refer to the
diagrams contained in the Burner and nozzle
specifications.
Start-up and use
Using the oven
The first time y ou use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
Before operating the product, remove all plastic film
from the sides of the appliance.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the recommended temperature for the
cooking mode or the desired temperature by turning
the THERMOSTAT knob.
A list detailing cooking modes and suggested
cooking temperatures can be found in the relevant
table (see Oven cooking advice table).
During cooking it is always possible to:
Change the cooking mode by turning the
SELECTOR knob.
Change the temperature by turning the
THERMOSTAT knob.
Set the total cooking time and the cooking end
time (see below).
Stop cooking by turning the SELECTOR knob to
the 0 position.
Never put objects directly on the bottom of the
oven; this will avoid the enamel coating being
damaged. Only use position 1 in the oven when
cooking with the rotisserie spit.
Always place cookware on the rack(s) provided.
*
Only available in certain models.
Burner ø Cookware diameter (cm)
Fast (R) 24 - 26
Semi Fast (S) 16 - 20
Auxiliary (A) 10 - 14

Содержание

Start up and use H Hotpoint ARISTON Using the hob Lightingthe burners For each BURNER knob there is a complete ring showing the strength of the flame for the relevant burner To light one of the burners on the hob 1 Bring a flame or gas lighter close to the burner 2 Press the BURNER knob and turn it in an anticlockwise direction so that it is pointing to the maximum flame setting 6 3 Adjust the intensity of the flame to the desired level by turning the BURNER knob in an anticlockwise direction This may be the minimum setting d the maximum setting 6 or any position in between the two If the appliance is fitted with an electronic lighting device see figure press the ignition button marked with the symbol XXX then hold the BURNER knob down and turn it in an anticlockwise direction towards the maximum flame setting until the burner is lit The burner may be extinguished when the knob is released If this occurs repeat the operation holding the knob down for a longer period of time If the flame is accidentally extinguished switch off the burner and wait for at least 1 minute before attempting to relight it If the appliance is equipped with a flame failure safety device press and hold the BURNER knob for approximately 2 3 seconds to keep the flame alight and to activate the device To switch the burner off turn the knob until it reaches the stop position Practical advice on using the burners For the burners to work in the most efficient way possible and to save on the amount of gas consumed it is recommended that only pans that have a lid and a flat base are used They should also be suited to the size of the burner To identify the type of burner please refer to the diagrams contained in the Burner and nozzle specifications Burner 0 Cookware diameter cm Fast R 24 26 Semi Fast S 16 20 Auxiliary A 10 14 Using the oven The first time you use your appliance heat the empty oven with its door closed at its maximum temperature for at least half an hour Ensure that the room is well ventilated before switching the oven off and opening the oven door The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away Before operating the product remove all plastic film from the sides of the appliance 1 Select the desired cooking mode by turning the SELECTOR knob 2 Select the recommended temperature for the cooking mode or the desired temperature by turning the THERMOSTAT knob A list detailing cooking modes and suggested cooking temperatures can be found in the relevant table see Oven cooking advice table During cooking it is always possible to Change the cooking mode by turning the SELECTOR knob Change the temperature by turning the THERMOSTAT knob Set the total cooking time and the cooking end time see below Stop cooking by turning the SELECTOR knob to the 0 position Never put objects directly on the bottom of the oven this will avoid the enamel coating being damaged Only use position 1 in the oven when cooking with the rotisserie spit Always place cookware on the rack s provided Only available in certain models 19

Скачать