Tp-Link TL-R460 Инструкция по эксплуатации онлайн [20/75] 39162

TL-R460 Cable/DSL Router User Guide

¾ MAC Address - This field displays the physical address of the LAN. The value

can't be changed.

¾ IP Address - Enter the IP address for the LAN of the Router, the formal is in

dotted-decimal notation (the factory default value is 192.168.0.1).

¾ Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code

determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

)

Note:

1) If you change the IP address of the LAN, you must use the new IP address to login to

the router.

2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool in

the DHCP server will not take effect, until they are re-configured. Besides this, the

Virtual Server and DMZ Host may change accordingly at the same time, you’d better

re-configure it as well.

4.3.2 WAN

Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on

the screen below.

The Router provides eight connection types for WAN to connect to the Internet, they are

“Dynamic IP”, “Static IP”, “PPPoE”, “802.1X + Dynamic IP”, “802.1X + Static IP”,

“L2TP/Russia L2TP”, “PPTP/Russia PPTP” and “Dual Access/Russia PPPoE”. (The

default type is “Dynamic IP”). For configuring the WAN, you should select the

connection type firstly according your needs.

1. Dynamic IP

If you aren’t given any login parameters and IP information, please select Dynamic IP

(shown in Figure 4-4), then the router will automatically get IP parameters from your ISP.

Click the Renew button to renew the IP parameters from your ISP. Click the Release

button to release the IP parameters.