Tp-Link TL-R460 [19/75] Quick setup

TL-R460 Cable/DSL Router User Guide

¾ WAN - This field displays the parameters applied to the WAN port of the router,

including “MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so

on.

)

Note:

If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will

be shown here while you are accessing the Internet. You can also cut the connection by

clicking the button. If you have not connected to the Internet, a Connect button will be

shown, you can then establish the connection by clicking the button.

¾ Traffic Statistics: This field displays the router's traffic statistics.

¾ System Up Time: This field displays the time of the router running from the time it is

powered on or is reset.

4.2 Quick Setup

Please refer to Chapter 3"Quick Installation Guide."

4.3 Network

Choose menu “Network”, you can see the submenus under the Network menu: LAN,

WAN and MAC Clone.

Figure 4-2

Click any of them, and you will be able to configure the corresponding function. The

detailed explanations for each submenu are provided below.

4.3.1 LAN

Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the

screen below.

Figure 4-3