Tp-Link TL-R460 [32/75] Mac clone

TL-R460 Cable/DSL Router User Guide

Figure 4-14

¾ MTU Size- The default MTU size is 1480 bytes, which is usually fine. For some ISPs,

you need modify the MTU. This should not be done unless you are sure it is

necessary for your ISP.

¾ Service Name/AC Name - The service name and AC (Access Concentrator) name

should not be configured unless you are sure it is necessary for your ISP.

¾ ISP Specified IP Address - If you know that your ISP does not automatically

transmit your IP address to the router during login, select Use IP Address specified

by ISP and enter the IP in dotted-decimal notation, which your ISP provided.

¾ Detect Online Interval - The default value is 0, you can input the value between 0

and 120. The router will detect Access Concentrator online at every interval between

the time. If the value is 0, it means the Router does not detect.

¾ Primary DNS & Secondary DNS - If you know that your ISP does not automatically

transmit DNS addresses to the router during login, select Use the following DNS

servers and enter the address in dotted-decimal notation of your ISP’s primary DNS

server. If a secondary DNS server address is available, enter it as well.

4.3.3 MAC Clone

Choose menu “Network→MAC Clone”, you can configure the MAC address of the

WAN on the screen below (shown in Figure 4-15).

Some ISPs require that you register the MAC address of your adapter, which is

connected to your cable, DSL modem or Ethernet during installation. You do not

generally need to change anything here.