Tp-Link TL-R460 [52/75] Static routing

TL-R460 Cable/DSL Router User Guide

¾ TCP-SYN-FLOOD Packets Threshold: (5 ~ 3600) - The default value is 50. Enter

a value between 5 ~ 3600 packets/s. When the current number of

TCP-SYN-FLOOD Packets is beyond the permitted value, the router will start up

the blocking function immediately.

¾ Ignore Ping Packet from WAN Port - Enable or disable “ignore ping packet from

WAN port”. The default is disabled. If enabled, the ping packet from the Internet

can not access the router.

¾ Forbid Ping Packet from LAN Port - Enable or disable forbidding Ping Packet to

access the router from the LAN port. The default value is disabled. If enabled, the

ping packet from the LAN port can not access the router. (Defends against some

viruses)

Click the Save button to save the settings.

Click the Blocked Dos Host List button to view the blocked hosts.

4.7 Static Routing

Choose menu “Static Routing”, you can configure the static route on the next screen

(shown in Figure 4-41). A static route is a pre-determined path that network information

must travel to reach a specific host or network.

Figure 4-41

¾ Destination IP Address - The “Destination IP Address” is the address of the

network or host that you want to assign to a static route.

¾ Subnet Mask - The “Subnet Mask” determines which portion of an IP address is the

network portion, and which portion is the host portion.

¾ Default Gateway - This is the IP address of the gateway device that allows for

contact between the router and the network or host.

¾ Status - This field displays the status, Enabled means the rule is effective,

Disabled means the rule is ineffective.

To add/modify a static routing entry:

Step 1: Click Add New…/Modify shown in Figure 4-41, you will see a new screen