Tp-Link TL-R460 Инструкция по эксплуатации онлайн [34/75] 39162

TL-R460 Cable/DSL Router User Guide

on the LAN.

Figure 4-17

¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you

must have another DHCP server within your network or else you must manually

configure the computer.

¾ Start IP Address - This field specifies the first address in the IP address pool. The

default address is 192.168.0.100.

¾ End IP Address - This field specifies the end address in the IP address pool. The

default address is 192.168.0.199.

¾ Address Lease Time - This is the amount of time in which a network user will be

allowed connection to the router with their current dynamic IP address. Enter the

amount of time (in minutes), the range of the time is 1 ~ 2880 minutes. The default

value is 120 minutes.

¾ Default Gateway - Suggest to input the IP address of the LAN port of the router,

default value is 192.168.0.1. (Optional)

¾ Default Domain - Input the domain name of your network. (Optional)

¾ Primary DNS - Input the DNS IP address provided by your ISP. You can consult

your ISP for it. (Optional)

¾ Secondary DNS - Input the IP address of another DNS server if your ISP provides

two DNS servers. (Optional)

)

Note:

To use the DHCP server function of the router, you must configure all computers on the

LAN as "Obtain an IP Address automatically" mode. This function will take effect until the

router reboots.