D-Link DI-604UP Инструкция по эксплуатации онлайн [16/61] 41931

the Internet connection is maintained during inactivity. If

the connection is inactive for longer than the defined

Maximum Idle Time, then the connection will be dropped.

Either set this to zero or enable Auto-reconnect to

disable this feature.

MTU MTU stands for Maximum Transmission Unit. For PPPoE

connections, you may need to change the MTU settings

in order to work correctly with your ISP.

Auto-Reconnect If enabled, the Broadband Router will automatically

connect to your ISP after your system is restarted or if the

connection is dropped.

HOME > WAN > Other>PPTP

PPTP Choose between Dynamic and Static IP.

IP Address Enter the IP address of the router for a static IP entry. Dynamic IP requires no

input here.

Subnet Mask Enter the Subnet Mask address of the router for a static IP entry. Dynamic IP

requires no input here.

Gateway Enter the gateway address here. This is the IP address of the ISP server.

Server IP Enter the IP address of the PPTP’s server computer. This is how the user will

become authenticated to use PPTP.

PPTP Account: Enter the name of the PPTP account as provided to you by your ISP.

PPTP PasswordEnter the PPTP password as provided to you by your ISP.

PPTP Retype Retype the password entered in the PPTP Password field.

Password

Maximum Idle Time

A value of 0 means that the PPP connection will remain connected. If

PPTP or Point-to-Point Protocol

is a safe method of sending

information between VPN’s

securely using encryption over

PPP. You, as the client, need to

enter the correct information that

the server has in order to create

that secure tunnel. Using

Dynamic IP, the router will set

your basic IP parameters for

you, such as the IP Address,

Subnet Mask and Gateway. For

Static IP, this information must

be set manually by the user. All

information in this window

should be provided by your ISP.