Home
Главная
IVT
Перфоратор
RHM-800 BMC
Инструкция по эксплуатации Страница: 8

IVT RHM-800 BMC [8/56] Instruction manual

Instruction manual

∙ Never pass the appliance over its own cord or

extension cable, while the tool is working. Make sure

you always know where the cable is.

∙ Do not wire a power cable directly into your device

yourself. Instead, take the device to your nearest

authorized Service Center.

∙ To avoid danger, damaged power cord should

be replaced by manufacturer or its agent, or similar

qualied person.

∙ Immediately unplug the tool when its cable is

damaged or cut.

ATTENTION! DANGER OF ELECTRIC

SHOCK!

Consider working area environment. Do not expose

power tools to rain. Do not use power tools in damp

or wet locations. Keep work area well lit and dry. Try

to prevent the device from getting wet or being

exposed to humidity. Do not leave it outside

overnight. Water entering a power tool will increase

the risk of electric shock.

∙ The power supply cable should be checked

regularly and, before using it, make sure the cable is

not damaged or worn out. If the cable is not in good

condition, do not use the appliance; take it to an

authorized service center.

∙ When tool is used outdoor, only use an extension

cable that is suitable for outdoor use and which is

marked for this specic use. Keep it away from the

working area, from damp, wet or oily surfaces and away

from heat and ammable materials.

∙ Avoid any accidental starting: make sure that the

power switch (if present) is in the «o» position, before

plugging the tool in.

∙ Remove adjusting keys or wrenches before turning

the tool on.

∙ Do not use the tool if the switch does not turn the

tool on or o. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

WARNING! During the use of certain

power tools, some dust containing

chemicals known to cause cancer,

may occur.

Some of these chemicals are: lead from lead based

paints, crystalline silica from bricks and cement and

other masonry products, arsenic and chromium from

chemically treated lumber and other dangerous

products. If dust is present, your risk from these

exposures varies, depending on how often you do this

type of work. To reduce your exposure to these

chemicals, any time you do pulverulent operations,

work in a well ventilated area and work with

approved safety equipment, such as dust masks

that are specially designed to lter out microscopic

particles.

∙ If the appliance strikes a foreign body, examine the

device for signs of damage and carry out any necessary

repairs before restarting and continuing to work.

∙ If the appliance starts to vibrate abnormally, turn

it o and check for the cause immediately. Vibration is

generally a warning of trouble.

∙ Always switch o the appliance and wait until

the device completely stops whenever you leave

the machine, before carrying out maintenance,

before changing accessories, checking, cleaning,

troubleshooting or working on the appliance.

∙ It is forbidden to move or modify any of the internal

parts of the device.

Specic safety rules

∙ Hold tools by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

“live” wire will make exposed metal parts of the tool

“live” and shock the operator.

∙ Wear ear protectors when using the tool for

extended periods. Prolonged exposure to high intensity

noise can cause hearing loss.

∙ Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses are NOT

safety glasses. It is also highly recommended that you

wear a dust mask and thickly padded gloves.

∙ Be sure the bit is secured in place before

operation.

∙ Under normal operation, the tool is designed to

produce vibration. The screws can come loose easily,

causing a breakdown or accident. Check tightness of

screws carefully before operation.

∙ In cold weather or when the tool has not been

used for a long time, let the tool warm up for a while

by operating it under no load. This will loosen up the

lubrication. Without proper warm-up, hammering

operation is dicult.

∙ Always be sure you have a rm footing. Be sure no

one is below when using the tool in high locations.

∙ Hold the tool rmly with both hands.

∙ Keep hands away from moving parts.

∙ Do not leave the tool running. Operate the tool only

when hand-held.

∙ Do not point the tool at any one in the area when

operating. The bit could y out and injure someone seriously.

∙ Do not touch the bit or parts close to the bit

immediately after operation; they may be extremely hot

and could burn your skin.

∙ Some materials contain chemicals which may be toxic.

IVT RHM-800 BMC [8/56] Instruction manual

Содержание

Похожие устройства