![Ariens ST28DLET PRO TRACK [25/38] Attachment clutch brake adjustment](/img/pdf.png)
Ariens ST28DLET PRO TRACK [25/38] Attachment clutch brake adjustment
![Ariens ST28DLET PRO HYDRO TRACK [25/38] Attachment clutch brake adjustment](/views2/1509893/page25/bg19.png)
EN - 25
DISCHARGE CHUTE CONTROL
(Figure 23)
If chute does not stay in position while
throwing snow or if chute does not rotate
freely, adjust the cable under the gear cover
so the chute lock fingers engage or
disengage the locking gear.
If chute does not stay in position:
Loosen the cable by loosening the rear
adjustment nut, and then tightening the
forward adjustment nut against the bracket
until the lock arm engages the gear teeth.
If chute does not rotate freely:
Tighten the cable by loosening the forward
adjustment nut, and then tightening the rear
adjustment nut against the bracket until all
cable slack is removed (Figure 23).
SPEED SELECTOR
ADJUSTMENT
(Figure 24)
To set neutral position:
1. Place machine on blocks, with the
wheels/tracks off of the ground.
2. Disconnect the trunion pin from the bell
crank.
3. Start the engine.
4. Hold down the traction clutch paddle.
5. Move bell crank to the position where
the wheels/tracks are not moving.
6. Shut off engine.
7. Move speed control to the neutral
position and hold in place.
8. Adjust trunion pin to a position where it
can be re-inserted into the bell crank
hole. Without moving the bell crank,
reinstall the trunion pin.
9. Remove blocks from under machine.
ATTACHMENT CLUTCH/BRAKE
ADJUSTMENT
Remove Attachment Cable Slack
(Figure 25 and 26)
1. Shut off engine, remove key, disconnect
spark plug wire and allow unit to cool
completely.
2. Loosen hardware securing belt cover to
unit.
NOTE: DO NOT completely remove the
hardware from unit.
3. Remove belt cover.
4. Loosen jam nut on cable adjustment
barrel, and then turn the adjustment
barrel up or down to lengthen or shorten
cable and remove all cable slack
(Figure 25).
Forward Adjustment Nut
Rearward
Adjustment Nut
Figure 23
IMPORTANT: IMPROPER
ADJUSTMENT could result in
unexpected movement of auger and
impeller causing death or serious
injury. Auger/Impeller must stop
within 5 seconds when Attachment
Clutch/Impeller Brake lever is
released.
Figure 24
1. Shift Rod
2. Trunnion Pin
3. Bell Crank
4. Hairpin
5. Bell Crank Hole
2
3
1
4
OS7185
5
Содержание
- Hydro pro sno thr 1
- Manuel du propriétaire utilisateur 1
- Models 1
- Owner operator manual 1
- Engine manual 2
- Introduction 2
- Manuals 2
- Model and serial numbers 2
- Product registration 2
- Table of contents 2
- Delivery 3
- Disclaimer 3
- Unauthorized replacement parts 3
- Attention 4
- Become alert 4
- Notations 4
- Obey the message 4
- Personal safety is involved 4
- Practices and laws 4
- Required operator training 4
- Safety 4
- Safety alerts 4
- Safety decals and locations 4
- Danger 5
- Emission control system 6
- Safety rules 6
- Assembly 8
- Install discharge chute chute control and chute rod 8
- Package contents 8
- Tools required 8
- Unfold handlebar 8
- Check auger gearcase oil 10
- Check engine crankcase oil 10
- Check function of all controls 10
- Check function of dual handle interlock 10
- Check tire pressure 926053 054 055 10
- Check track tension 926056 10
- Fill fuel tank 10
- Remote deflector control 10
- Run in attachment belt 10
- Setting neutral position 10
- Controls and features 11
- Attachment clutch right hand lever 13
- Controls and features 13
- Dual handle interlock 13
- Ignition switch 120vac start 13
- Operation 13
- Primer bulb 13
- Speed selector 13
- Traction drive clutch left hand lever 13
- Choke control knob 14
- Choke run 14
- Discharge chute 14
- Electric starter 14
- Quick turn chute control 14
- Recoil starter handle 14
- Remote deflector control 14
- Snow clean out tool 14
- Throttle 14
- Differential lock 926056 15
- Moving the unit with the engine off 15
- Drift cutters 16
- Heated handles 16
- Scraper blade 16
- Skid shoes 16
- Track angle 926056 16
- Add fuel stabilizer to extend fuel storage life 17
- Add fuel to fuel tank 17
- Filling fuel tank 17
- Gasoline 17
- Check axle lock 926056 18
- Check dual handle interlock 18
- Check engine fuel crankcase oil 18
- Check function of clutches 18
- Check skid shoes 18
- Frozen impeller 18
- Fuel shut off valve 18
- Manual start 18
- Pre start 18
- Starting and shut off 18
- To stop in an emergency 18
- Electric start 120v 19
- Shut off 19
- Snow removal 19
- Tips for operation 19
- Transport 19
- Traveling 19
- Check dual handle interlock 20
- Check fasteners 20
- Maintenance 20
- Maintenance schedule 20
- Service position 20
- 054 05 21
- Change engine oil 21
- Check auger gearcase 21
- Check clutch cable adjustment 21
- Check clutch operation 21
- Check engine oil 21
- Check tire pressure 21
- Clean engine 21
- Auger shaft 22
- General lubrication 22
- For replacement 23
- Scraper blade 23
- Service and adjustments 23
- Shear bolts 23
- Skid shoes 23
- Handlebar height 24
- Remote deflector control 24
- Attachment clutch brake adjustment 25
- Discharge chute control 25
- Remove attachment cable slack 25
- Speed selector adjustment 25
- Check attachment idler arm roller clearance 26
- Attachment drive belts replacement 27
- Check attachment brake 27
- Check belt finger clearance 27
- Remove old attachment drive belts 27
- Traction drive clutch adjustment 27
- Install new attachment drive belts 28
- Traction drive belt replacement 28
- Height adjuster cable adjustment 926056 29
- Track tension adjustment 926056 29
- Add fuel stabilizer 30
- Fuel system 30
- Long term 30
- Short term 30
- Storage 30
- Accessories 31
- Engine problems 31
- Engine stops 31
- Engine will not crank start 31
- Problem probable cause correction 31
- Service parts 31
- Troubleshooting 31
- Does not operate in forward reverse 32
- Problem probable cause correction 32
- Troubleshooting 32
- Unit throws snow poorly or does not throw snow 32
- Automatic traction control 33
- Height in cm 33
- Length in cm 33
- Specifications 33
- Traction control with axle mounted lockout 33
- Weight lbs kg 33
- Width in cm 33
- X 4 8 41 x 12 20 16 x 6 8 41 x 16 20 5 13 7 track 33
- And chore performing equipment limited warranty 34
- Sno te 34
- Sno thr 34
- Sno thro sno tek and chore performing equipment limited warranty 34
- Special extensions 34
- Customer responsibilities 35
- Exceptions and limitations 35
- To find an authorized service representative 35
- Australian consumer law 36
- Disclaimer 36
- Disclaimer of further warranty 36
- Exclusions items not covered by this warranty 36
- Limitation of remedy and damages 36
- Special exclusions on utility vehicles 36
- California and epa united states environmental protection agency evaporative emission control warranty statement 37
Похожие устройства
- Ariens ST28LET TRACK Руководство пользователя
- Ariens ST30DLE DELUXE Руководство пользователя
- Ariens SNO-TEK 28E Руководство пользователя
- Ariens POWER BRUSH 28 Руководство пользователя
- Yanmar YDP 40 STN-E Руководство пользователя
- Sdmo ST 2.36 H Руководство пользователя
- Sdmo TR 2.36 H Руководство пользователя
- Sdmo ST 3.60 H Руководство пользователя
- Sdmo TR 3.60 H Руководство пользователя
- Sdmo HP 2.26 H Руководство пользователя
- Sdmo XC 2.34 H Руководство пользователя
- Honda WMP 20 Руководство пользователя
- Gardena 3500/4E Classic Руководство пользователя
- Whirlpool AWT 2240 Таблица программ
- Whirlpool AWT 2240 Инструкция по эксплуатации
- Kawasaki ZXR 400 Сервисный мануал
- Kawasaki ZXR 400 Инструкция по эксплуатации
- Gardena Classic 4000/4i EP Инструкция по эксплуатации
- Al-Ko HW 600 Eco Инструкция по эксплуатации
- Karcher BP 4 Deep Well Инструкция по эксплуатации