Ariens ST28DLET PRO TRACK [29/38] Height adjuster cable adjustment 926056
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ariens ST28DLET PRO TRACK [29/38] Height adjuster cable adjustment 926056

Ariens ST28DLET PRO HYDRO TRACK [29/38] Height adjuster cable adjustment 926056
EN - 29
TRACK TENSION ADJUSTMENT
(926056)
(Figure 32 and 33)
Check the track tension by applying pressure
on the track midway between the upper and
rear track rollers. Deflection should be
approximately 3/8" (9.6 mm) (Figure 32).
If deflection is excessive, tighten the track
tension.
If unit pulls to the left or right when a straight
path is desired adjust the track tension. If the
unit is pulling to the left, tighten the left track
adjuster. If the unit is pulling to the right,
tighten the right track adjuster.
To adjust (Figure 33):
1. Tighten the adjuster nut to tighten the
track tension.
Loosen the adjuster nut to reduce track
tension.
2. Check that unit tracks straight with no
pulling to either side.
HEIGHT ADJUSTER CABLE
ADJUSTMENT
(926056)
(Figure 34):
1. Make sure that height adjustment lock
finger is fully engaged.
2. Loosen jam nut on cable adjustment
barrel.
3. Turn the adjustment barrel to remove all
cable slack and bring the overtravel arm
until it makes slight contact with the right
end of the slot in the height adjuster lock
finger.
4. Tighten the jam nuts.
Figure 32
3/8"
(9.6 mm)
OS7226
Figure 33
Track
Adjusters
OS7228
1. Height Adjuster Lock Finger
2. Overtravel Arm
3. Height Adjuster Cable
4. Jam Nuts
3
2
1
OS7229
Before adjusting ensure
that height adjuster lock
finger is fully engaged.
Pin on overtravel arm
makes slight contact
with end of slot.
4
Figure 34

Содержание

Похожие устройства

Скачать