Ariens ST28DLET PRO TRACK [32/38] Troubleshooting

Ariens ST28DLET PRO HYDRO TRACK [32/38] Troubleshooting
EN - 32
Does not
operate in
Forward /
Reverse.
1. Slack in traction cable.
2. Traction belt not
functioning.
3. Speed selector not
adjusted properly.
4. Transmission is bypassed.
1. Loosen jam nut on cable, remove
slack from cable, tighten jam nut.
2. Repair or replace traction drive
belt. See Traction Drive Belt
Replacement on page 28.
3. Adjust speed selector. See
Speed Selector Adjustment on
page 25.
4. Verify bypass rod is pushed fully
forward into the frame (see
Moving The Unit With the Engine
Off on page 15).
Unit throws
snow poorly or
does not throw
snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Impeller is frozen in place.
4. Ice or debris is obstructing
auger.
5. Attachment drive belts
slipping, worn or damaged.
1. Replace shear bolts (see Shear
Bolts on page 23).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 25).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belts (see Attachment Drive
Belts Replacement on page 27).
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION

Содержание

Скачать