Siemens VSZ 6GP1266 [12/122] Vacuuming
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Siemens VSZ 6GP1266 [12/122] Vacuuming

Siemens VSZ 6GP1266 [12/122] Vacuuming
11
Vacuuming
Figure
a)If your appliance is fitted with a constant suction
system, the power of the appliance is automatically
adjusted to the fill level of the filter bag.
The following power settings can be selected:
Low
suction range:
For vacuuming delicate fabrics, e.g. curtains.
Moderate
suction range:
For daily vacuuming of lightly soiled floors.
High
suction range:
For vacuuming durable floor coverings, hard floors
and heavily soiled surfaces.
b)Air power:
For heavily soiled surfaces and coarse dirt deposits.
The appliance vacuums with the maximum possible
suction.
Figure
Adjusting the floor tool:
a)For vacuuming rugs
and carpets =>
b)For vacuuming
hard floors =>
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Turbo brush
If your appliance is equipped with a turbo brush,
please consult the accompanying instruction manual
for notes on its use and maintenance.
Other accessories that you do not need can be stored
easily in the accessories compartment of the appliance
lid.
Figure
When the opening button is pressed, the lid of the
accessories compartment opens automatically.
Take out the required accessories.
Figure
After removal, close the lid of the accessories
compartment and engage the catch.
11
10
9
8
*
Dependent on model
Figure
Vacuuming with accessories
(attach to handle or suction pipe as required)
a)Crevice nozzle
For cleaning crevices and corners
b)Upholstery nozzle
For cleaning upholstered furniture, curtains, etc.
c)Hard furnishings brush
For vacuuming picture frames, books, furniture
requiring particular care, etc.
Hard-floor brush
Figure
For vacuuming hard floor coverings (tiles, parquet floor-
ing, etc.)
Push the telescopic tube into the connecting piece of
the hard-floor brush until it engages.
Press on the unlatching sleeve and pull out the telescop-
ic tube to disconnect.
Figure
For vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
Cleaning the hard-floor brush
Figure
a)Vacuum from below to clean the brush.
b)Cut through threads and hairs wound round the
rollers using scissors.
Vacuum threads and hairs with the crevice nozzle.
Figure
Once you have switched off the vacuum cleaner, you
can use the parking aid on the back of the vacuum
cleaner if you wish to stop vacuuming for a short
time.
To do this, slide the catch on the floor tool into the
groove on the back of the vacuum cleaner.
Figure
The appliance can also be carried using the carrying
handle when vacuuming stairs, for example.
When the work is done
Figure
Unplug the vacuum cleaner.
Briefly pull the power cord and release.
The cord rewinds automatically.
Figure
To store or transport the vacuum cleaner, use the
storage aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the
catch on the floor tool into the groove on the
underside of the appliance.
19
18
17
16
15*
14*
13*
12
en

Содержание

Похожие устройства

en Vacuuming Figure El a If your appliance is fitted with a constant suction system the power of the appliance is automatically adjusted to the fill level of the filter bag The following power settings can be selected Low suction range For vacuuming delicate fabrics e g curtains Moderate suction range For daily vacuuming of lightly soiled floors High suction range For vacuuming durable floor coverings hard floors and heavily soiled surfaces b Air power For heavily soiled surfaces and coarse dirt deposits The appliance vacuums with the maximum possible suction Figure EI Adjusting the floor tool a For vacuuming rugs and carpets b For vacuuming hard floors Figure UI Vacuuming with accessories attach to handle or suction pipe as required a Crevice nozzle For cleaning crevices and corners b Upholstery nozzle For cleaning upholstered furniture curtains etc c Hard furnishings brush For vacuuming picture frames books furniture requiring particular care etc Hard floor brush Figure EES For vacuuming hard floor coverings tiles parquet floor ing etc Push the telescopic tube into the connecting piece of the hard floor brush until it engages Press on the unlatching sleeve and pull out the telescop ic tube to disconnect Figure E3 For vacuuming hard floor coverings tiles parquet flooring etc Cleaning the hard floor brush 1111 llll Caution Floor tools are subject to a certain amount of wear depending on the type of hard floors you have e g rough rustic tiles Therefore you must check the underside of the floor tool at regular intervals Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors such as parquet or linoleum The manufacturer does not accept any responsibility for damage caused by worn floor tools Turbo brush If your appliance is equipped with a turbo brush please consult the accompanying instruction manual for notes on its use and maintenance Other accessories that you do not need can be stored easily in the accessories compartment of the appliance lid Figure 03 a Vacuum from below to clean the brush b Cut through threads and hairs wound round the rollers using scissors Vacuum threads and hairs with the crevice nozzle Figure E Once you have switched off the vacuum cleaner you can use the parking aid on the back of the vacuum cleaner if you wish to stop vacuuming for a short time To do this slide the catch on the floor tool into the groove on the back of the vacuum cleaner Figure EQ The appliance can also be carried using the carrying handle when vacuuming stairs for example When the work is done Figure E When the opening button is pressed the lid of the accessories compartment opens automatically Take out the required accessories Figure E Unplug the vacuum cleaner Briefly pull the power cord and release The cord rewinds automatically Figure m After removal close the lid of the accessories compartment and engage the catch Figure To store or transport the vacuum cleaner use the storage aid on the underside of the vacuum cleaner Stand the vacuum cleaner up on its end Slide the catch on the floor tool into the groove on the underside of the appliance E Dependent on model 11

Скачать