Ricoh Aficio SP 9100DN [220/344] Wiconfig

wiconfig

Use the "wiconfig" command to make settings for IEEE 802.11b.

View settings

msh> wiconfig

View IEEE 802.11b settings

msh> wiconfig cardinfo

• If IEEE 802.11b is not working correctly, its information is not displayed.

Configuration

msh> wiconfig "parameter"

Parameter Value configured

mode {ap|adhoc|802.11adhoc} You can set the infrastructure mode (ap) , the

802.11 ad hoc mode (802.11adhoc), or the ad

hoc mode (adhoc).

The default is ad hoc mode.

ssid "ID value" You can make settings for the SSID in the infras-

tructure mode.

Usable characters are ASCII 0x20-0x7e (32

bytes).

An SSID value is set automatically to the nearest

access point if no setting is made.

If no setting is made for the ad hoc mode, the

same value as for the infrastructure mode or an

ASSID value is automatically set. The default is

blank.

channel frequency "channel no." You can enable or disable the WEP function. To

enable the WEP function, specify [on]; to disable

it, specify [off].

To start the WEP function, enter the correct WEP

key. The default is "11".

key "key value" val {1|2|3|4} You can specify the WEP key when entering in

hexadecimal.

With a 64-bit WEP, you can use 10 digit hex-

adecimals. With a 128-bit WEP, you can use 26

digit hexadecimals.

5. Monitoring and Configuring the Printer

218