Home
Главная
Zelmer
Утюг
28Z016
Инструкция по эксплуатации Страница: 52

Zelmer 28Z016 [52/56] Dry ironin

52 GW28-006_v01

How to ll with water

Disconnect the iron from mains supply –

outlet.

Move the Steam Control Knob to – (7)

position.

Release the water inlet cover – (6) and

ll water through the water inlet hole.

Fill up to the „ – MAX” level marked on

the side of the water tank.

Close the water inlet cover – (6).

For best result, it is advisable to use demineralised water or distilled

water.

Do not use chemically descaled water or any other liquids.

Preparation for operation– rst time ironing

Remove any protective lms or stickers from the – sole plate (1) and

the cabinet.

Unwind and straighten the – power cord (12).

Fill the water tank with demineralised water or distilled water. (See –

How To Fill Water).

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (2) in clockwise direction to ●●● position

– control light (4) glows.

Control light goes off when the required temperature is reached. –

Move the – Steam Control Knob (7) to position.

Steam starts coming out from the holes in the sole plate after putting –

the iron in horizontal position and after Burst of steam knob (9).

Begin rst time ironing with an old towel. –

When the water tank is empty and there is no more steam produced; the –

preparation work is completed. The iron is now ready for proper use.

Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;

the iron is switched off.

After ironing

Move the – Steam Control Knob (7) to position.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

Spraying

This fun – ction can be used any time

and is not affect any setting.

Fill the water tank as described in How –

to Fill Water.

Aim the – nozzle (6) to the garment.

Press the – Spray Button (8).

It may be necessary to press the spray button a few times to start

this function.

Dry ironing – Always follow the garment manufacturer’s ironing

instructions mentioned at the garment label.

Connect the ir – on to a suitable mains supply outlet.

Turn the – Temperature Dial (2) in clockwise direction to; set ●, ●● or

●●● position.

Control light (4) – glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

iron is now ready for use.

After ironing move the – Temperature Dial (2) in anti-clockwise direction

to „MIN”; the iron is switched off.

Disconnect the iron from mains supply outlet. –

When the ir – on gets cool completely, store it vertically in a safe place.

Steam ironing – Always follow the garment manufacturer’s

ironing instructions mentioned at the garment label.

Fill the water tank. ( – See How To Fill Water).

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (2) in clockwise direction to ●●● position.

(For optimum steam quality, do not use ● or ●● setting for steam

ironing).

Control – light (4) glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

iron is now ready for use.

Move the – Steam Control Knob (7) to selected position, in order to set

the amount of steam.

Zelmer 28Z016 [52/56] Dry ironin

Содержание

Похожие устройства