Home
Главная
Zelmer
Утюг
28Z016
Инструкция по эксплуатации Страница: 54

Zelmer 28Z016 [54/56] Cleaning and maintenance

54 GW28-006_v01

Self-cleaning

This function removes the scales and minerals built up in the Steam

Chamber. The iron will remain in the best condition if this function is

performed at least once a month or more regularly depending on the

hardness of the water used.

Fill the water tank with demineralised water, or distilled water. (See –

How To Fill Water)”. Fill it up to the half.

Connect the iron to a suitable mains supply outlet (See the item –

„Preparation for operation”).

Turn the – Temperature Dial (9) in clockwise direction to „MAX“

position.

Control light (4) – glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

iron is now ready for use.

Wait for one more cycle; pilot light glows and goes off. –

After nishing move the – Temperature Dial (9) in anti-clockwise

direction to „MIN”; the iron is switched off.

Disconnect the iron from mains supply outlet. –

Hold the iron horizontally over a sink. –

Move the – Steam Control Knob (7) to self-cleaning position

(Descaling).

Steam and boiling hot water will drain from the holes on the soleplate –

washing away the scales and minerals that have built up inside the

Steam Chamber.

Gently move the iron back and forth until the water tank is empty. –

When Self-Cleaning is complete, release the – Self-Cleaning Knob (7).

Rest your iron back on its heel rest and allow to fully cool down. –

Wipe the soleplate with a cold damp cloth. –

Caution!

Keep skin/body away from the hot water.

Draining the water

Move the – Steam Control Knob (3) to

position.

Disconnect the iron from mains supply –

outlet.

Press the – Burst of Steam Button (4),

to release any trapped water when the

soleplate still hot.

Press the – Spray Buttons (5), to release

any trapped water.

Turn the iron upside down and gently –

shake it to remove the remaining water.

Before storage make sure that Steam Control Knob (7) is in

position.

Cleaning and maintenance

Disconnect the iron from mains supply outlet. –

The iron should get cool completely before cleaning. –

Use a damp cloth and gentle washing liquid for cleaning. –

Do not use aggressive detergents like cream, milk, paste etc. to –

clean the casing. They can remove graphic symbols such as: scales,

marking, caution signs, etc.

Never use sharp or rough objects to remove the deposits on the sole –

plate.

Never use any abrasive, vinegar or descaling agents to clean the iron. –

Zelmer 28Z016 [54/56] Cleaning and maintenance

Содержание

Похожие устройства