![Teka VR 90 4G AI TR AL [16/30] Gas conversion](/img/pdf.png)
Teka VR 90 4G AI TR AL [16/30] Gas conversion
![Teka VR 90 4G AI TR AL [16/30] Gas conversion](/views2/1069795/page16/bg10.png)
GB
16
If the flexible supply cable fitted to these
appliances ever needs to be changed, it
should be replaced by TEKA’s official service.
Gas conversion
Important!
Any alteration that is to be made to the
appliance to convert it to a different
type of gas should only be carried out
by a qualified technician.
Information for Technical Assis-
tance: whenever the type of gas or the
appliance’s pressure is changed, the new
regulation plate should be placed on top of
the old one so that the new features can
be seen after the change.
The tasks involved in conversion are:
* Replace the injectors.
* Adjust the taps’ minimums.
The injectors required for each gas type
are shown in table 1.
To replace the injectors, follow these ins-
tructions:
1 Remove the grids and upper parts of the
burner so that the injector can be seen.
2 Using a number 7 pipe spanner, remove
the injectors and replace them with the
new ones. Take care to press the injector
down firmly so that there is no leakage.
3 Replace the grid and burners that were
previously removed.
When the injectors have been changed,
this is how to adjust the minimums:
Hobs CG.1 4G, CG.1 3G 1P, CGC 4G and
CGC 4G AI AL
1 Turn the burners on to their minimum.
2 Take the oven or the control panel out so
that you can access the gas taps.
3 Use a slim, grooved screwdriver to turn
the screw located to the right or in the
centre of the gas tap’s shaft (the flame
increases when you turn to the left and
decreases when you turn to the right).
4 When properly adjusted, check that the
flame does not go out when you turn the
knob quickly from maximum to minimum.
5 On hob CGC 4G AI AL, in order to
access the taps’ regulator screw, you
first have to lift up the cover that protects
the taps and then take out the two
screws that fasten this cover to the
body.
Other hobs
1 Turn the burners on to their minimum.
2 Pull the taps’ controls firmly upwards to
remove them.
3 Use a slim, grooved screwdriver to turn
the screw located to the right or in the
centre of the gas tap’s shaft (the flame
increases when you turn to the left and
decreases when you turn to the right).
4 When properly adjusted, check that the
flame does not go out when you turn the
knob quickly from maximum to mini-
mum.
The only task required for the conversion
is to replace the injectors and regulate the
minimums.
TEKA INDUSTRIAL, S.A. assumes no
responsibility for any hob malfunction if the
gas conversion or the adjustment of the
burners’ minimums has not been carried
out by TEKA’s official personnel.
Содержание
- Contents inhalt table des matières 3
- Introduction einführung présentation 5
- Guide to using the instructions booklet 10
- Installation 11
- Positioning the hobs 11
- Anchoring the hob 12
- Positioning the oven 12
- Connecting the electricity 15
- Connecting the gas 15
- Gas conversion 16
- Table 1 17
- Dimensions and powers 18
- Models 18
- Technical information 18
- Models 19
- A before installation make sure that the local supply conditions the gas type and pressure are compatible with the applian ce s setup b the setup conditions for this appliance are written on the label or the rating plate c this appliance should not be connected to a device for removing combustion products it should be installed and con nected in compliance with the current ins tallation standards special attention should be paid to the regulations applying to ventilation 20
- A gas cooking appliance produ ces heat and moisture at the site where it is installed the kitchen should be provided with suitable ventilation natu ral ventilation sources should be kept clear a window opened or an effective mechanical ventilation system device such as a hood installed 20
- Class 3 hob 20
- Common features for all models with electric hotplates and auto matic ignition 20
- Common features for all models with gas burners 20
- If an electric hotplate gets cracked the hob should be disconnected from the elec tricity current 20
- Table 2 20
- Table 3 20
- Technical data 20
- The intense and prolonged use of the appliance may call for comple mentary ventilation such as opening a window or more efficient ventilation such as increasing the power of the mechanical ventilation if this exists 20
- The supply voltage and frequency will be as shown on the rating plate 20
- Warnings 20
- You should keep the guaran tee certificate or where relevant the technical datasheet together with the instruction manual for the dura tion of the useful life of the appliance it has important technical information about the appliance 20
- Igniting the burners 21
- Special requirements before starting for the first time 21
- Use and maintenance 21
- Turning on the electric hotplates 23
- Anti accidental turn system on gas controls 24
- Safety system components 24
- Using the hotplates 24
- Maintenance of the burners 25
- Right wrong 25
- Suggestions for using the burners effectively 25
- Cleaning and care 26
- Maintenance of the electric hotplates cg 3g 1p 26
- Right wrong wrong 26
- Suggestions for using the hotplates effectively 26
- Reminder 29
- If something doesn t work 30
Похожие устройства
- Garmin Nuvi 265 Инструкция по эксплуатации
- Cobra RU 715 Инструкция по эксплуатации
- Teka CGW LUX 70 5G AI AL TR CI NAT Инструкция по эксплуатации
- Intro VR-460 Инструкция по эксплуатации
- Garmin nuvi 255W Инструкция по эксплуатации
- Star X41 Инструкция по эксплуатации
- Teka CGW LUX 60 4G AI AL TR CI NAT Инструкция по эксплуатации
- Intro VR-470 Инструкция по эксплуатации
- Garmin nuvi 255 Инструкция по эксплуатации
- Star X63 Инструкция по эксплуатации
- Teka CGW LUX 60 4G AI AL CI NAT Инструкция по эксплуатации
- Intro VR-670 Инструкция по эксплуатации
- Star X61 Инструкция по эксплуатации
- Intro VR-810 Инструкция по эксплуатации
- Teka TCF 604 Инструкция по эксплуатации
- Cobra RU 735 Инструкция по эксплуатации
- Teka TB 600 Инструкция по эксплуатации
- Intro VR-820 Инструкция по эксплуатации
- Garmin nuvi 215W Инструкция по эксплуатации
- Cobra RU 850 Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 0
Купили новую после установки все подключили, не можем понять как пользоваться?
4 года назад