![Biostar GF8200 M2G+ Версия 6.x [15/37] Gf8200 m2g bios manual](/img/pdf.png)
Biostar GF8200 M2G+ Версия 6.x [15/37] Gf8200 m2g bios manual
![Biostar GF8200 M2G+ Версия 6.x [15/37] Gf8200 m2g bios manual](/views2/1711891/page15/bgf.png)
GF8200 M2G+ BIOS Manual
14
ACPI APIC support
T his item is used to enable or disable the motherboard's AP IC (Advan ced
Programmable Interrupt Controller). The APIC provides multiprocessor support,
more IRQs and faster interrupt handling.
Options: Enabled (Default) / Disabled
AMI OEMB table
Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root
System Description T able (RSDT) table.
Options: Enabled (Default) / Disabled
Headless mode
This is a server-specific feature. A headless server is one that operates without a
keyboard, monitor or mouse. To run in headless mode, both BIOS and operating
system (e.g. Windows Server 2003) must support headless operation.
Options: Disabled (Default) / Enabled
WOL From Soft-Off
This item allows you control the wake on LAN (WOL) function.
Options: Disabled (Default) / Enabled
Resume On Ring
This item allows you control the wake on ring function.
Options: Disabled (Default) / Enabled
USB Resume from S3/S4
This item allows you to enable or disabled the USB resume from S3/S4 function.
Options: Disabled (Default) / Enabled
Resume By RTC Alarm
When “ Enabled”, you can set the date and time at which the RTC (real-time clock)
alarm awak ens the system from S uspend mode.
Options: Disabled (Default) / Enabled
Содержание
- Gf8200 m2g bios manual 1
- Acpi support 2
- Apm support 2
- Bios setup 2
- Epa green pc support 2
- Gf8200 m2g bios manual 2
- Introduction 2
- Plug and play support 2
- Dram support 3
- Gf8200 m2g bios manual 3
- Notice 3
- Pci bus support 3
- Supported cpus 3
- Using setup 3
- Ami bios 4
- Gf8200 m2g bios manual 4
- Main menu 4
- Once you enter ami bios setup utility the main menu will appear on the screen providing an overview of the basic system information 4
- Set the system date note that the day automatically changes when you set the date 4
- Set the system internal clock 4
- Shows system information including bios version built date etc 4
- Shows system memory size vga shard memory will be excluded 4
- System date 4
- System memory 4
- System time 4
- Floppy a 5
- Gf8200 m2g bios manual 5
- Ide configuration 5
- Onchip p ata controller 5
- Onchip s ata controller 5
- Sata mode select 5
- Select the type of floppy disk drive installed in your system options 1 4m 3 in default 360k 5 5 in 1 m 5 5 in 720k 3 in 2 8m 3 in none 5
- This item allows you to choose the sata operation mode to enable sata5 sata6 device please choose raid or ahci options sata mode default raid mode ahci mode 5
- This item allows you to control the onboard ide controller options enabled default disabled 5
- This item allows you to control the onboard sata controller options enabled default disabled 5
- To enter the sub menu of detailed options 5
- Gf8200 m2g bios manual 6
- Gf8200 m2g bios manual 7
- Advanced menu 8
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 8
- Cpu configuration 8
- Gf8200 m2g bios manual 8
- Notice 8
- The advanced menu allows you to configure the settings of cpu super i o power management and other system devices 8
- This item shows the cpu information that the bios automatically detects 8
- Acpi srat table 9
- Gf8200 m2g bios manual 9
- Onboard floppy controller 9
- Powernow 9
- Secure virtual machine mode 9
- Select enabled if your system has a floppy disk controller fdc installed on the system board and you wish to use it if you installed another fdc or the system uses no floppy drive select disabled in this field options enabled default disabled 9
- Superio configuration 9
- The operating system scans the acpi srat at boot time and uses the information to better allocate memory and schedule software threads for maximum performance this item controls whether the srat is made available to the operating system at boot up or not options enabled default disabled 9
- This item allows you to enable or disable the powernow power saving technology options enabled default disabled 9
- Virtualization technology can virtually separate your system resource into several parts thus enhance the performance when running virtual machines or multi interface systems options enabled default disabled 9
- Gf8200 m2g bios manual 10
- Gf8200 m2g bios manual 11
- Hardware health configuration 11
- Gf8200 m2g bios manual 12
- Smart fan configuration 12
- Fan ctrl sensitive 13
- Fan ctrl start value 13
- Gf8200 m2g bios manual 13
- Increasing the value will raise the speed of cpu system fan options 1 127 13
- Power configuration 13
- When cpu system temperature arrives to the set value the cpu system fan will work under smart fan function mode options 0 127 13
- Gf8200 m2g bios manual 14
- Gf8200 m2g bios manual 15
- Gf8200 m2g bios manual 16
- Rtc alarm date days 16
- System time 16
- This item allows you to control the usb 1 mode of the usb controller options enabled default disabled 16
- This item allows you to control the usb 2 mode of the usb controller options enabled default disabled 16
- This item shows the usb controller and using usb device information 16
- Usb 1 controller 16
- Usb 2 controller 16
- Usb configuration 16
- You can choose the system boot up time input hour minute and second to specify 16
- You can choose which date the system will boot up 16
- Gf8200 m2g bios manual 17
- Audio configuration 18
- Azalia audio 18
- Emulation type this item allows you to select the emulation type of the usb mass storage device options auto default floppy forced fdd hard disk cdrom 18
- Gf8200 m2g bios manual 18
- This item allows you to control the onboard codec and on chip codec options internal codec e default internal codec external codec disabled 18
- Gf8200 m2g bios manual 19
- Mac id information 19
- Onbaord lan boot rom 19
- Onboard lan 19
- Onboard lan configuration 19
- This item allows you to enable or disable the onboard lan boot rom options disabled default enabled 19
- This item shows the lan mac id information 19
- This option allows you to control the onboard lan controller options auto default disabled 19
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 20
- Clear nvram 20
- Gf8200 m2g bios manual 20
- Notice 20
- Pcipnp menu 20
- Plug play os 20
- This item allows you to clear the data in the nvram cmos by selecting yes options no default yes 20
- This section describes configuring the pci bus system pci or personal computer interconnect is a system which allows i o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components 20
- When set to yes bios will only initialize the pnp cards used for the boot sequence vga ide scsi the rest of the cards will be initialized by the pnp operating system like window 95 when set to no bios will initialize all the pnp cards for non pnp operating systems dos netware this option must set to no options no default yes 20
- Allocate irq to pci vga 21
- Gf8200 m2g bios manual 21
- Palette snooping 21
- Pci ide busmaster 21
- Pci latency timer 21
- Pci resource 21
- Some old graphic controllers need to snoop on the vga palette and then map it to their display as a way to provide boot information and vga compatibility this item allows such snooping to take place options disabled default enabled 21
- This item allows bios to choose a irq to assign for the pci vga card options yes default no 21
- This item controls how long a pci device can hold the pci bus before another takes over the longer the latency the longer the pci device can retain control of the bus before handing it over to another pci device options 32 default 64 96 128 160 192 224 248 21
- This item is a toggle for the built in driver that allows the onboard ide controller to perform dma direct memory access transfers options enabled default disabled 21
- Gf8200 m2g bios manual 22
- Pci express configuration 22
- Boot device priority 23
- Boot menu 23
- Gf8200 m2g bios manual 23
- Hard disk drives 23
- Items in this sub menu specify the boot device priority sequence from the available devices the number of device items that appears on the screen depends on the number of devices installed in the system 23
- Removable drives 23
- The bios will attempt to arrange the hard disk boot sequence automatically you can also change the booting sequence the number of device items that appears on the screen depends on the number of devices installed in the system 23
- The bios will attempt to arrange the removable drive boot sequence automatically you can also change the booting sequence the number of device items that appears on the screen depends on the number of devices installed in the system 23
- This menu allows you to setup the system boot options 23
- Addon rom display mode 24
- Boot success beep 24
- Bootup num lock 24
- Cd dvd drives 24
- Gf8200 m2g bios manual 24
- Interrupt 19 capture 24
- Quick boot 24
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 25
- Chipset menu 25
- Gf8200 m2g bios manual 25
- Hybrid sli support 25
- Notice 25
- Primary graphics adapter 25
- This item allows you to choose the primary graphics device options pcie vga card first default internal vga first pci vga card first 25
- This item allows you to control the hybrid sli function options disabled default enabled 25
- This submenu allows you to configure the specific features of the chipset installed on your system this chipset manage bus speeds and access to system memory resources such as dram it also coordinates communications with the pci bus 25
- Chipset thermal limit 26
- Display refresh 26
- Gf8200 m2g bios manual 26
- Hi priority channel 26
- Igpu and ext vga selection 26
- Igpu frame buffer detect 26
- Igpu frame buffer size 26
- Load pmu by sw 26
- Pcie training 26
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 27
- Gf8200 m2g bios manual 27
- Notice 27
- Performance menu 27
- This submenu allows you to change voltage and clock of various devices however we suggest you use the default setting changing the voltage and clock improperly may damage the device 27
- Chipset over voltage 28
- Cpu ov er voltage 28
- Gf8200 m2g bios manual 28
- Ht ov er voltage 28
- Memory over voltage 28
- Over voltage configuration 28
- Processor voltage 28
- This item allows you to select cpu voltage control options startup default 3 6 10 28
- This item allows you to select ddr voltage control options startup default 0 50v 0 00v 0 50v 28
- This item allows you to select ht voltage control options startup default 0 00v 0 00v 0 00v 28
- This item allows you to select nb sb voltage control options startup default 0 50v 0 00v 0 50v 28
- This item allows you to set the cpu voltage options auto default 0 0v 1 5v differed by cpu 28
- Bank interleaving bank interleaving is an advanced chipset technique used to improve memory performance memory interleaving increases bandwidth by allowing simultaneous access to more than one piece of memory options auto default disabled 29
- Dram timing configuration 29
- Gf8200 m2g bios manual 29
- Memory configuration 29
- Gf8200 m2g bios manual 30
- Gf8200 m2g bios manual 31
- Cpu ldt spread spectrum 32
- Gf8200 m2g bios manual 32
- Options auto default 1 3 clk 32
- Options auto default 2 5 clk 32
- Options auto default 75ns 105ns 127 ns 195ns 327 ns 32
- Pcie spread spectrum 32
- Sata spread spectrum 32
- Spread spectrum configuration 32
- This item allows you to control the cpu ldt spread spectrum options disabled default enabled 32
- This item allows you to control the pci express spread spectrum options disabled default linear down 32
- This item allows you to control the sata spread spectrum options disabled default linear down 32
- Trfc0 trfc1 trfc2 trfc3 32
- Amd overclocking configuration 33
- Core fid 33
- Custom p states 33
- Gf8200 m2g bios manual 33
- Igpu spread spectrum 33
- Pci spread spectrum 33
- This item allows you to control the on chip gpu spread spectrum options disabled default 1 0 tri center 2 0 tri center 3 0 tri center 5 0 tri center 33
- This item allows you to control the pci spread spectrum options disabled default linear down 33
- This item allows you to select the p states controlling options disabled default enabled 33
- This item allows you to select the ratio frequency of am2 cpu options x8 1600mhz x31 6300mhz differed by cpu 33
- This item appears only when using am2 cpus 33
- Cpu frequency mhz 34
- Gf8200 m2g bios manual 34
- Mcp pci express frequency mhz 34
- Memclock value 34
- Memory clock mode 34
- Processor frequency multiplier 34
- Sb to k8 cpu freq auto 34
- Sb to k8 cpu frequency 34
- Sb to k8 cpu linkwidth 34
- Abandon all changes made during the current session and exit setup 35
- Abandon all changes made during the current session and restore the previously saved values 35
- Discard changes 35
- Discard changes and exit 35
- Exit menu 35
- Gf8200 m2g bios manual 35
- Load optimal defaults 35
- Save all configuration changes to cmos ram and exit setup 35
- Save changes and exit 35
- This menu allows you to load the optimal default settings and save or discard the changes to the bios items 35
- This selection allows you to reload the bios when problem occurs during system booting sequence these configurations are factory settings optimized for this system 35
- Change supervisor password 36
- Change user password 36
- Clear user password 36
- Gf8200 m2g bios manual 36
- If the supervisor password is not set then the user password will function in the same way as the supervisor password if the supervisor password is set and the user password is set the user will only be able to view configurations but will not be able to change them 36
- Security 36
- Setting the supervisor password will prohibit everyone except the supervisor from making changes using the cmos setup utility you will be prompted with to enter a password 36
- This item allows supervisor to set the user level options full access default no access view only limited 36
- This item is for clearing user password 36
- This sub menu allows you to provide revise supervisor and user password 36
- User acess level 36
- Gf8200 m2g bios manual 37
Похожие устройства
- Biostar GF8200 M2G+ Версия 6.x Инструкция
- Biostar GF8200C M2+ Версия 6.x Инструкция BIOS
- Biostar GF8200C M2+ Версия 6.x Инструкция
- Biostar GF8200E Версия 6.x Инструкция BIOS
- Biostar GF8200E Версия 6.x Инструкция
- Biostar TF8200 A2+ Версия 5.x Инструкция BIOS
- Biostar TF8200 A2+ Версия 5.x Инструкция
- Biostar N68S+ Версия 6.x Инструкция BIOS
- Biostar N68S+ Версия 6.x Инструкция
- Biostar N68S Версия 6.x Инструкция BIOS
- Biostar N68S Версия 6.x Инструкция
- Biostar NF520-A2 TE Версия 6.x Инструкция BIOS
- Biostar NF520-A2 TE Версия 6.x Инструкция
- Biostar TF520-A2 Версия 5.x Инструкция BIOS
- Biostar TF520-A2 Версия 5.x Инструкция
- Biostar GF7025-M2 TE Версия 6.x Инструкция BIOS
- Biostar GF7025-M2 TE Версия 6.x Инструкция
- Daikin RXYQ5PY1 Инструкция по эксплуатации
- Daikin RXYQ5PY1 Брошюра
- Daikin RXYQ5PY1 Сервис мануал