First FA-6403-1 [2/14] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

First FA-6403-1 [2/14] English

First FA-6403-1 [2/14] English
2 3
instrUction MAnUAl
instrUction
Please read this instruction carefully in order to
use the scale correctly & keep the scale in good
condition.
FEAtUrEs
1. Indicate volume of water and milk
2. Two weight unit systems g/lb:oz convertible
3. Two volume unit systems ml/’oz convertible
4. Low battery power/Overload indication
5. With high precision strain gauge sensor
6. With tare function
7. Auto off
to instAll or rEPlAcE BAttEry
1x3V CR2032 lithium batteries (included).
Remove isolation sheet before use;
Open the battery case cover at the bottom of
scale:
Take out the used battery with
the aid of a sharp object, as
shown in picture.
Install new battery by putting
one side of the battery beneath
the battery bafe and then
pressing down the other side.
lcD
working MoDEs
Unit convErsion BUtton
At the bottom of scale, you can
nd a unit conversion button as
shown in picture.
to convErt wEight Unit
If the scale is with both unit systems of Metric (g,
ml) or Imperial (lb:oz, ’oz), press MODE button
to choose working mode (weight, milk volume,
water volume), then press
unit conversion
button to convert between two systems. Take
the conversion of weight unit for example: (see
g. 1)
* When setting g as weight unit, the default
volume unit is ml;
* When setting lb: oz as weight unit, the default
volume unit is ’oz.
Remark: The unit system of scale depends
on sales destination or the requirement of
distributor.
to stArt wEighing

A. Place the scale on a solid and at surface.
B. Place bowl (if used) on the scale before
turning on the scale.
C. Gently press on the scale by hand to turn on.
D. Wait until LCD shows all information.
E. Load weighing object on to start weighing,
LCD wil l show the weight reading.
F. If the weighing object is water or milk, press
MODE button to choose volume mode and
view the volume of weighing object.
(see g. 3)
A. Place the scale on a solid and at surface.
B. Gently press on the scale by hand to turn on.
C. Wait until LCD shows „0“, and press MODE
button to choose „Water“ or „Milk“ mode.
D. Put a liquid container onto the scale platform.
E. Press ZERO button to reset LCD to „0“.
F. Pour liquid (water or milk) into the container,
LCD shows the volume of the liquid.
G. Press MODE button to choose „Weight“
mode and view the weight of liquid.

To weigh different loads consecutively without
removing loads from the scale. Put rst Load on
the scale, get weight reading. Press ZERO
button to reset the LCD reading to „0“ before
adding next load. You can repeat this operation.
(see g. 4)



LCD will show “-----” or “0g” each time ZERO
is pressed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an icon
“o” on lower left corner of LCD mean “ZERO”
function is active. Max.weight capacity remains
unchanged.
(see g. 5)



LCD will show “-----” or “0g” each time ZERO
is pressed. “-----” means not stable, please
wait for a moment. “0g” and meanwhile an
icon “TARE” on upper left corner of LCD mean
“TARE” function is active. Max. Weight capacity
is reduced by total weight of all loads.

By pressing ZERO, you can see the total weight
of all loads on the scale. If you want to weigh
more loads, just press ZERO to reset LCD
reading to ‚0‘ again.
AUto shUt oFF
Auto shut-off occurs if display
shows ‚0‘ or shows the same
weight reading for 2 minutes.
wArning inDicAtors
1. Replace new battery.
2. Scale overload. Remove
item to avoid damage. Max.
weight capacity is indicated
on the scale.
clEAning AnD cArE
1. Clean the scale with a slightly damp cloth.
DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.
2. All plastic parts should be cleaned
immediately after contact with fats, spices,
vinegar and strongly avored/colored foods.
Avoid contact with acids citrus juices.
3. Always use the scale on a hard, at surface.
DO NOT use on carpet.
4. DO NOT strike, shake or drop the scale.
5. The scale is high precision device. Please
take care of it.
6. Please keep it dry.
7. Please check whether battery is installed or
in high level if scale can not be turned on.
8. The scale is for family use only, not for
commerical purpose.



You can help protect the environment! Please
remember to respect the local regulations: hand
in the non-working electrical equipments to an
appropriate waste disposal center.
English
English
N
i
1
3
4

Содержание

Похожие устройства

Скачать