![Icom IC-A210 [32/40] Installation and removal](/img/pdf.png)
Icom IC-A210 [32/40] Installation and removal
![Icom IC-A210 [32/40] Installation and removal](/views2/1074157/page32/bg20.png)
28
6
INSTALLATION AND REMOVAL
■ Transceiver installation
q Insert a
3
/
32
in allen wrench into the 2-holes in the front
panel.
w Turn the wrench counterclockwise until the front panel is
loose.
• A cable connects the front panel with the main unit.
e Disconnect the flat cable from the front panel’s connector
to remove the front panel.
r Visually confirm that the metal catches on the top and bot-
tom of the transceiver are as shown below.
t Turn the wrench clockwise until the main unit is fixed to the
installation rack.
• Turn the wrench in the upper socket as shown below when using
the installation rack for Icom products.
• Turn the wrench when in the lower socket as shown below when
using the installation rack for 3rd party* products.
y Replace the disconnected cable and removed front panel
in place.
■
Transceiver removal
The IC-A210 may easily be removed from the installation
rack, if desired.
q Perform the same steps as q–e of “Transceiver installa-
tion” to remove the front panel (See the left column).
w Turn the wrench counterclockwise until the main unit
moves slightly from the installation rack.
• See t of “Transceiver installation” for details.
e Pull out the transceiver slowly from the installation rack.
RCL
MEM
OFF
VOL
PUSH
TEST
COMM
DUAL
EC
iA210
• Front panel rear view
• Main unit top/bottom view
Main unit front view
IC-A210.qxd 2007.07.24 2:06 PM Page 28
Содержание
- Ic a210 qxd 2007 7 4 2 06 pm page a 1
- Instruction manual 1
- Vhf air band transceiver 1
- 13 v 27 v dc power source 2
- Carefully and completely before using the transceiver 2
- Caution equipment damage may occur 2
- Easy channel selection 2
- Explicit definitions 2
- Features 2
- Gps memory function 2
- Important 2
- Intercom function 2
- Large bright oled display 2
- Note if disregarded inconvenience only no risk of personal injury re or electric shock 2
- R warning personal injury re hazard or electric shock may occur 2
- Read all instruction 2
- Save this instruction manual 2
- The explicit definitions below apply to this instruction manual 2
- This in struction manual contains important operating instructions for the ic a210 2
- Word definition 2
- Be careful 3
- Do not 3
- Precautions 3
- R warning neve 3
- Ic a210 qxd 2007 7 4 2 06 pm page d 4
- Table of contents 4
- Panel description 5
- I front panel continued 6
- I main unit 7
- I rear panel 7
- Panel description 7
- I function display 8
- Basic operation 9
- Caution do no 9
- I frequency selection 9
- I standby frequency selection step 1 2 9
- Ï direct frequency selection 9
- Ï general frequency selection 9
- Basic operation 10
- I frequency exchanging not exchanging step 2 2 10
- I receiving 10
- I transmitting 10
- Note do no 10
- Basic operation 11
- I frequency set example 11
- Basic operation 12
- I direct frequency setting mode operation 12
- I dualwatch operation 12
- I entering memory mode 13
- I memory channel type 13
- I programming notes 13
- Memory operation 13
- Ï blank channel 13
- Ï gps memory channel gps 13
- Ï group memory channel grp01 grp20 13
- Ï history memory channel history 13
- Ï memory protect function 13
- Ï regular memory channel memory 13
- Ï weather memory channel weather u s a version only 13
- I channel selection 14
- I programming a memory channel 14
- Memory operation 14
- I programming example 15
- Memory operation 15
- I memory mode menu 16
- I transferring memory contents 16
- Regular and group memory channels only 16
- Group memory channel 17
- I regular memory channel 17
- Clearing the memory contents 18
- History memory channel 18
- Group memory channel only 19
- I programming group names 19
- Programming channel names 19
- Regular memory channel only 19
- Channel tag list 20
- Group memory channel only 20
- I programming channel tag 20
- I gps memory 21
- I weather memory channel 21
- U s a version only 21
- I gps memory edit 22
- I memory protection 22
- Memory operation 22
- Convenient 23
- I accessing 121 mhz emergency frequency 23
- I lock function 23
- Other functions 23
- I intercom function 24
- I squelch test function 24
- Other functions 24
- I weather memory channel scan u s a version only 25
- Other functions 25
- D operating menu mode 26
- I menu mode programming 26
- Menu mode 26
- D automatic noise limiter anl 27
- D headphone level hp level 27
- D intercom1 microphone audio input level incom lv1 27
- D intercom1 squelch level mic1 sql 27
- D intercom2 microphone audio input level incom lv2 27
- D intercom2 squelch level mic2 sql 27
- I menu mode items 27
- Menu mode 27
- Set the headphone output level while receiving 27
- Set the intercom1 microphone input level 27
- Set the intercom1 squelch level the setting level is required to open the squelch when speak ing to the intercom1 27
- Set the intercom2 microphone input level 27
- Set the intercom2 squelch level the setting level is required to open the squelch when speak ing to the intercom2 27
- The anl automatic noise limiter function reduces noise components such as that caused by engine ignition systems while receiving 27
- D dimmer brightness high disp high 29
- D dimmer brightness low disp low 29
- D dimmer mode disp mode 29
- D sidetone level sidetone lv 29
- D transmitting microphone selection tx mic sel 29
- I menu mode items continued 29
- Menu mode 29
- Set the lower brightness level in the automatic adjustment range when auto is selected at the dimmer mode the transceiver automatically adjusts its display brightness by the current lighting conditions 29
- Set the oled dimmer mode 29
- Set the upper brightness level in the automatic adjustment range when auto is selected at the dimmer mode 29
- Set the usable microphone when pushing microphone s ptt switch the item allows you to control which connected microphone is permitted to transmit 29
- When using an optional headset supplied from 3rd party via the adapter the transceiver outputs your transmitted voice to the headset for monitoring 29
- D dimmer brightness manually disp man 30
- D dimmer response disp resp 30
- D external input aux in 30
- D frequency display freq disp 30
- D user 1 setting u 1 id set 30
- D user 2 setting u 2 id set 30
- I menu mode items continued 30
- Menu mode 30
- Set the 1 khz digit frequency displaying to the oled 30
- Set the brightness manually to suit your own preferences 30
- Set the dimmer switching speed when selecting auto at the dimmer mode 30
- Set the external input mode 30
- Set the user 1 channel tag to the desired id 30
- Set the user 2 channel tag to the desired id 30
- I transceiver installation 32
- Installation and removal 32
- Transceiver removal 32
- Cloning 33
- D data cloning 33
- D displayed message 33
- D general 34
- D receiver 34
- D transmitter 34
- Specifications 34
- D cs a21 35
- D mb 5 35
- D opc 1529 35
- D ps 8 35
- Options 35
- Ic a210 qxd 2007 7 4 2 06 pm page 32 36
- Ic a210 qxd 2007 7 4 2 06 pm page 33 37
- M e m o 38
- Electromagnetic interference compatibility 39
- Safety training information 39
- 1 32 kamiminami hirano ku osaka 547 0003 japan 40
Похожие устройства
- Эван В1-24 Инструкция по эксплуатации
- Samsung NP350V5C-S0ERU Инструкция по эксплуатации
- Эван В1-30 Инструкция по эксплуатации
- Icom IC-F1000 Инструкция по эксплуатации
- HP Pavilion m6-1030er Инструкция по эксплуатации
- Эван WARMOS TT-18K Инструкция по эксплуатации
- Icom IC-F3011 Инструкция по эксплуатации
- Samsung NP-RF511-S0BRU Инструкция по эксплуатации
- Эван WARMOS TT-25 Инструкция по эксплуатации
- Icom IC-F4011 Инструкция по эксплуатации
- HP Pavilion m6-1051er Инструкция по эксплуатации
- Эван WARMOS TT-25K Инструкция по эксплуатации
- Icom IC-F14/S Инструкция по эксплуатации
- Icom IC-F24/S Инструкция по эксплуатации
- HP Pavilion m6-1060er Инструкция по эксплуатации
- Эван K-WRM18 R Инструкция по эксплуатации
- Эван K-WRM25 R Инструкция по эксплуатации
- Icom IC-F3001 Инструкция по эксплуатации
- Samsung NP350V5C-S06RU Инструкция по эксплуатации
- Эван ЭПВН 9.45 Инструкция по эксплуатации