Icom IC-F9011 [20/32] Clock function

BASIC OPERATION

■ Clock function

The transceiver indicates the current time and date when

[Clock] is pushed. And you can change the indication format

and time/date settings.

When you use the transceiver for the ﬁrst time, or after the

transceiver has sat unused for a long time, make sure to

check the date and time indication after turning the power

ON. If the time and date are not correct, reset them. (See

‘Time and date settings’ as at right.)

D Time and date indication

Push [Clock] to indicate the current time and date on the LCD.

• When the indication format is set to 12-hour, “AM” or “PM” is

indicated.

• The LCD indication returns to the stand-by mode after 30 sec.

has passed with no operation.

12:00

YMD

08-04-01

MUTE CLOCK ZONE

Date indication format (Y: Year, M: Month, D: Day)

The time indication format (12-hour/24-hour)

Time

Date

w Push [Clock] again to return to the stand-by mode.

D Time and date settings

q Push [Clock] to indicate the current time and date on the

LCD.

12:00

YMD

08-04-01

MUTE CLOCK ZONE

w Push and hold [Clock] for 1 sec. to enter the time and date

setting mode.

• The time indication format, “24HR” or “12HR” blinks.

12:00

YMD

08-04-01

MUTE CLOCK ZONE

e Push [Clock] to select the desired item to be changed.