Home
Главная
Icom
Радиостанции
IC-M36
Инструкция по эксплуатации Страница: 2

Icom IC-M36 [2/36] Safety training information

Your Icom radio generates RF electromagnetic energy during

transmit mode. This radio is designed for and classified as

“General Population Use” in an uncontrolled environment.

This radio has been evaluated for compliance at the distance

of 2.5 cm (1 inch) with the FCC RF exposure limits for “

Gen-

eral Population Use

”. In addition, your Icom radio complies

with the following Standards and Guidelines with regard to RF

energy and electromagnetic energy levels and evaluation of

such levels for exposure to humans:

• FCC OET Bulletin 65 Edition 01-01 Supplement C, Evaluating Compli-

ance with FCC Guidelines for Human Exposure to Radio Frequency

Electromagnetic Fields.

•

American National Standards Institute (C95.1-2005), IEEE Standard

for Safety Levels with Respect to Human Exposure to Radio Frequency

Electromagnetic Fields, 3 kHz to 300 GHz.

•

American National Standards Institute (C95.3-2002), IEEE Recom-

mended Practice for the Measurement of Potentially Hazardous Electro-

magnetic Fields– RF and Microwave.

• The

following accessories are authorized for use with this product. Use of

accessories other than those speciﬁed may result in RF exposure levels

exceeding the FCC requirements for wireless RF exposure.; Belt Clip

(MB-109), Rechargeable Li-Ion Battery Pack (BP-252) and Alkaline Bat-

tery Case (BP-251).

To ensure that your expose to RF electromagnetic en-

ergy is within the FCC allowable limits for general popu-

lation use, always adhere to the following guidelines:

•

DO NOT operate the radio without a proper antenna attached, as this

may damaged the radio and may also cause you to exceed FCC RF ex-

posure limits. A proper antenna is the antenna supplied with this radio by

the manufacturer or antenna speciﬁcally authorized by the manufacturer

for use with this radio.

•

DO NOT transmit for more than 50% of total radio use time (“50% duty

cycle”). Transmitting more than 50% of the time can cause FCC RF expo-

sure compliance requirements to be exceeded. The radio is transmitting

when the “transmit indicator” appears on the LCD. You can cause the

radio to transmit by pressing the “PTT” switch.

•

ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body

when transmitting and only use the Icom belt-clips which are listed on

p. 28 when attaching the radio to your belt, etc., to ensure FCC RF

exposure compliance requirements are not exceeded. To provide the re-

cipients of your transmission the best sound quality, hold the antenna at

least 5 cm (2 inches) from your mouth, and slightly off to one side.

The information listed above provides the user with the information needed

to make him or her aware of RF exposure, and what to do to assure that this

radio operates with the FCC RF exposure limits of this radio.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF energy that can possibly

cause interference with other devices or systems. To avoid such interference,

turn off the radio in areas where signs are posted to do so. DO NOT operate

the transmitter in areas that are sensitive to electromagnetic radiation such as

hospitals, aircraft, and blasting sites.

SAFETY TRAINING INFORMATION

WARNING

CAUTION

Icom IC-M36 [2/36] Safety training information

Содержание

Похожие устройства