Icom IC-T2H [19/50] Repeater operation

Icom IC-T2H [19/50] Repeater operation
15
5
REPEATER OPERATION
General
When using a repeater, the transmit frequency is shifted from
the receive frequency by the offset frequency. It is convenient
to program repeater information into memory channels (p.
19).
Set the receive frequency (repeater output frequency).
Push [DUP] one or more times to select DUP or DUP.
•“DUP indicates the transmit frequency is shifted down; DUP
indicates the transmit frequency is shifted up.
When the auto repeater function is in use (USA version only) this
selection and step are not necessary (p. 17).
Push [C T] to activate the subaudible tone encoder, ac-
cording to repeater requirements.
•“T appears.
Refer to the table of subaudible tone frequencies on the following
page.
Push and hold [PTT] to transmit.
The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
If oFF appears, check the offset frequency (p. 16).
Release [PTT] to receive.
Push and hold [ ] to check whether the other stations
transmit signal can be directly received or not.
D Tone information
Some repeaters require a tone to be accessed. In this case,
precede step
at left with the required tone.
DTMF TONES
While pushing [PTT], push the desired digit key(s) to transmit
DTMF tones.
The transceiver has 5 DTMF memory channels. See p. 22 for de-
tails.
1750 Hz TONE
While pushing [PTT], push and hold [ ] for 1 to 2 sec. to
transmit a 1750 Hz tone signal.
Convenient
Tone scan function: When you dont know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
Push and hold [SC] to activate the tone scan. See p. 27 for
more details.
IC-T2H Manual 01.12.5 4:31 PM Page 15 (1,1)

Содержание

Скачать