Icom IC-W32A [18/48] I frequency or channel selection via the keypad

FREQUENCY AND CHANNEL SETTING

[EXAMPLE]: Setting the frequency to 145.360 MHz.

■ Frequency or channel selection via the keypad

Frequency

q Assign the main band to the desired display with [MAIN].

w Select VFO mode with [VFO].

e Push 6 digit keys to input a frequency.

•Push [•] to input the frequency starting from the 100 kHz digit.

•When a digit is mistakenly input, push [(VFO)CLR] and input from

the beginning.

•“0,” “2,” “5” and “7” are acceptable for the 1 kHz digits (depending

on the 10 kHz digit).

•Any frequency in the receive frequency range can be selected,

regardless of the operating band.

D Memory channels

q Assign the main band to the desired display with [MAIN].

w Select memory mode with [MR].

e Push 2 digit keys to select the desired memory channel.

•The ﬁrst ten memory channels (00–09) are preceded by a “0.”

•To select scan edge channels, 1A to 5B, use [•(M)(DTMF•M)] for

“A” and [#(T SCAN)] for “B.”

•Only programmed memory channels can be selected.

[EXAMPLE]: Selecting memory channel 43 (when channel 43 is already programmed).

MAIN MAIN MAIN MAIN

MR 4 3

MAIN MAIN MAIN MAIN MAIN

Decimal point appears.

VFO 1 04 5 3 6