Candy AQUA 8T MET [31/33] Chapter 13
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Candy AQUA 8T MET [31/33] Chapter 13

Candy AQUA 8T MET [31/33] Chapter 13
60
CHAPTER 13
EN
FAULT
If the fault should persist, contact a Candy Technical Assistance Centre. For prompt servicing, give the model of
the washing machine, to be found on the label placed on the cabinet inside of the porthole or on the
guarantee certificate.
Important
1The use of environment friendly detersives without phosphates may produce the following effects:
-The discharge rinse water may result cloudier due to the presence of zeolites in suspension. This does not
compromise the efficiency of the rinses.
-The presence of white powder (zeolites) on the washing at the end of the washing cycle. This does not
remain incorporated in the fabric and does not alter the colour.
-The presence of foam in the last rinse water which is not necessarily a sign of inadequate rinsing.
-The non-ionic surface-active agents present in the composition of washing machine detersives are often
difficult to remove from the washing itself and, even in small quantities, may produce visible signs of the
formation of foam.
- Carrying out further rinses, in cases such as this, is not useful.
2 If your washing machine fails to function, carry out the above-mentioned checks before calling the Candy
Technical Assistance Service.
1. Does not function
on any
programme
2. Does not load
water
3. Does not discharge
water
4. Water on floor
around washing
machine
5. Does not spin
6. Strong vibrations
during spin
Mains plug not plugged in
Mains switch not on
No power
Electric circuit fuses failure
Load door open
See cause 1
Inlet tap turned off
Timer not set correctly
Discharge tube bent
Leak from the washer between the tap
and inlet tube
The washing machine has not
discharged water
“No spin” setting (some models only)
Washing machine not perfectly level
Tie braces not removed
Washing load not evenly distributed
Insert plug
Turn on mains switch
Check
Check
Close load door
Check
Turn on water inlet tap
Set timer on correct position
Straighten discharge tube
Replace washer and tighten the tube
on the tap
Wait a few minutes until the machine
discharges water
Turn the programme dial onto spin
setting
Adjust special feet
Remove Tie braces bracket
Distribute the washing evenly
CAUSE
REMEDY

Содержание

Похожие устройства

CHAPTER 13 FAULT 1 Does not function on any programme REMEDY CAUSE Mains plug not plugged in Insert plug Mains switch not on Turn on mains switch No power Check Electric circuit fuses failure Check Load door open Close load door See cause 1 Check Inlet tap turned off Turn on water inlet tap Timer not set correctly Set timer on correct position 3 Does not discharge water Discharge tube bent Straighten discharge tube 4 Water on floor around washing machine Leak from the washer between the tap and inlet tube Replace washer and tighten the tube on the tap 5 Does not spin The washing machine has not discharged water Wait a few minutes until the machine discharges water No spin setting some models only Turn the programme dial onto spin setting Washing machine not perfectly level Adjust special feet Tie braces not removed Remove Tie braces bracket Washing load not evenly distributed Distribute the washing evenly 2 Does not load water 6 Strong vibrations during spin If the fault should persist contact a Candy Technical Assistance Centre For prompt servicing give the model of the washing machine to be found on the label placed on the cabinet inside of the porthole or on the guarantee certificate Important 1 The use of environment friendly detersives without phosphates may produce the following effects The discharge rinse water may result cloudier due to the presence of zeolites in suspension This does not compromise the efficiency of the rinses The presence of white powder zeolites on the washing at the end of the washing cycle This does not remain incorporated in the fabric and does not alter the colour The presence of foam in the last rinse water which is not necessarily a sign of inadequate rinsing The non ionic surface active agents present in the composition of washing machine detersives are often difficult to remove from the washing itself and even in small quantities may produce visible signs of the formation of foam Carrying out further rinses in cases such as this is not useful 2 If your washing machine fails to function carry out the above mentioned checks before calling the Candy Technical Assistance Service 60

Скачать