Icom IC-M402 [15/50] Scan operations

SCAN OPERATIONS

■ Setting tag channels

For more efficient scanning, add desired channels as tag

channels or clear tag channels for unwanted channels. Chan-

nels set as non-tag channels will be skipped during scanning.

Tag channels can be assigned to each channel group

(U.S.A., International, Canada) independently.

q While pushing [H/L], push [CH/WX] one or more times to

select the desired channel group, if desired.

w Select the desired channel to set as a tag channel.

e Push [Y] and [Z] simultaneously for 1 sec. to set the dis-

played channel as a tag channel.

•“TAG” appears in the function display.

r To cancel the tag channel setting, repeat e .

•“TAG” disappears.

• Clearing all tag channels in the selected channel group

➥ While pushing [Y] and [Z], Turn power ON to clear all tag

channels in the channel group.

■ Starting a scan

Set scan type (priority or normal scan) and scan resume timer

in advance using set mode. (p. 20)

q Set tag channels as described at left.

w Make sure the squelch is closed to start a scan.

e While pushing [H/L], push [CH/WX] one or more times to

select the desired channel group, if desired.

r Push [Y] or [Z] for 1 sec. to start priority or normal scan.

•“Pri scan 16” or “Normal scan” appears in the function display.

•When a signal is detected, scan pauses until the signal disap-

pears or resumes after pausing 5 sec. according to set mode set-

ting. (Channel 16 is still monitored during priority scan.)

•While in the scanning, use [Y] and [Z] key to check tag channels,

change the scanning direction or resume the scan manually.

•“16” ﬂashes and a beep tone sounds when a signal is received

on Channel 16 during priority scan.

•Push [Y] and [Z] for 1 sec. to set the paused channel as a tag

channel.

t To stop the scan, push [Y] or [Z].

Scan starts. When a signal is received

[Example]: Starting a priority scan.

00_IC-M402_S.qxd 02.2.21 0:07 PM Page 9 (1,1)