![Einhell RT-XM 305 U [24/104] Operation as wood plastics saw](/img/pdf.png)
Einhell RT-XM 305 U [24/104] Operation as wood plastics saw
![Einhell RT-XM 305 U [24/104] Operation as wood plastics saw](/views2/1078977/page24/bg18.png)
8. Insert the two base frame parts in such a way that
the bottom and top cross struts (E, F) are
positioned in the relevant openings on the side
part (B) and the cross strut (C) (Figure 20).
9. Screw the bottom cross struts (E) to the other part
of the base frame (Figure 21/1) as described
under 5.
10. Screw the top cross struts (F) to the other part of
the base frame (Figure 21/2) as described under
6.
11. Pull the four rubber stoppers (32) from the bottom
side of the saw (Figure 22).
12. Place the saw onto the base frame so that the
openings in which the rubber stoppers (32) were
held are in line with the four openings on the top
side of the saw mounts (J). Then insert the four
screws (M) through the feet from the top and
screw the saw onto the base frame (Fig. 23 – 24).
6.4 Precision adjustment of the stop for crosscut
90° (Fig. 1, 25/-27)
Fasten the turntable (17) in 0° position.
Undo the locking screw (22) and move the
machine head (4) all the way to the right using the
handle (1).
Place the 90° angular stop (a) between the blade
(7) and the turntable (17).
Adjust the adjustment screw (38) until the angle
between the blade (7) and the turntable (17)
equals 90°.
Finally, check the position of the pointer (20) on
the scale (19). If necessary, release the pointer
(20) with a crosstip screwdriver, move to the 0°
position of the scale (19) and retighten the
holding screw.
No stop angle included.
6.5 Precision adjustment of the stop for miter cut
45° (Fig. 1, 25, 28-29)
Fasten the turntable (17) in 0° position.
Undo the locking screw (22) and move the
machine head (4) all the way to the left using the
handle (1), until it coincides at 45°.
Place the 45° stop angle (b) between the blade
(7) and the turntable (17).
Adjust the adjustment screw (37) so that the
angle between the blade (7) and the turntable
(17) equals exactly 45°.
No stop angle included.
7. Operation as wood/plastics saw
7.1 Cross cut 90° and turntable 0° (Fig. 1-3, 30)
For cutting widths up to approx. 100 mm it is possible
to fix the saw’s drag function with the locking screw
for drag guide (25) in rear position. If the cutting width
exceeds 100 mm you must ensure that the locking
screw for drag guide (25) is slackened and that the
machine head (4) can be moved.
Move the machine head (4) to its upper position.
Use the handle (1) to push back the machine
head (4) and fix it in this position if required
(dependent on the cutting width).
Place the piece of wood to be cut at the stop rail
(11) and on the turntable (17).
Lock the material with the clamping device (8) on
the fixed saw table (18) to prevent the material
from moving during the cutting operation.
Push down the release lever (3) to release the
machine head (4).
Press the ON/OFF switch (2) to start the motor.
With the drag guide (24) fixed in place: Use the
handle (1) to move the machine head (4) steadily
and with light pressure downwards until the saw
blade (7) has completely cut through the
workpiece.
With the drag guide (24) not fixed in place: Pull
the machine head (4) all the way to the front and
then use the handle (1) to move it downwards
steadily and with light pressure. Now push the
machine head (4) slowly and steadily to the very
back until the saw blade (7) has completely cut
through the workpiece.
When the cutting operation is completed, move
the machine head (4) back to its upper (home)
position and release the ON/OFF button (2).
Important. The integral resetting springs will
automatically lift the machine head. Do not simply let
go of the handle (1) after cutting, but allow the
machine head (4) to rise slowly, applying slight
counterpressure as it does so.
7.2 Cross cut 90° and turntable -52°...+60°
(Fig. 1-3, 31)
The crosscut saw can be used to make crosscuts of
0°- 52° to the left and 0° - 60° to the right in relation to
the stop rail.
Release the turntable (17) by slackening the
locking grip (14).
Press the latched position lever (13), turn the
turntable (17) and scale pointer (15) to the
desired angular setting on the dial (16) and lock
into place with the locking grip (14). The saw has
locking positions at angles of - -45°, -30°, -22.5°, -
15°, 0°, 15°, 22.5°, 30°, 45° and 60°, at which you
can engage latched position lever.
24
GB
Anleitung_RT_XM_305_U_SPK7:_ 14.03.2012 14:36 Uhr Seite 24
Содержание
- Art nr 43 07 0 i nr 11022 rt xm 1
- Inhaltsverzeichnis 12
- Gerätebeschreibung 13
- Lieferumfang bild 1 5 13
- Sicherheitshinweise 13
- Bestimmungsgemäße verwendung 14
- Technische daten 14
- Vor inbetriebnahme 15
- Betrieb als holz kunststoffsäge 16
- Austausch der netzanschlussleitung 18
- Betrieb als metallsäge 18
- Transport abb 1 3 18
- Entsorgung und wiederverwertung 19
- Reinigung wartung und ersatzteilbestellung 19
- Table of contents 20
- Items supplied fig 1 5 21
- Layout 21
- Safety information 21
- Intended use 22
- Technical data 22
- Before starting the equipment 23
- Operation as wood plastics saw 24
- Cleaning maintenance and ordering of spare parts 26
- Disposal and recycling 26
- Operation as metal saw 26
- Replacing the power cable 26
- Transport fig 1 3 26
- Sommaire 27
- Consignes de sécurité 28
- Description de l appareil 28
- Volume de livraison figures 1 5 28
- Caractéristiques techniques 29
- Utilisation conforme à l affectation 29
- Avant la mise en service 30
- Fonctionnement comme scie à bois plastique 32
- Fonctionnement comme scie à métaux 33
- Mise au rebut et recyclage 34
- Nettoyage maintenance et commande de pièces de rechange 34
- Remplacement de la ligne de raccordement réseau 34
- Transport fig 1 3 34
- Indice 35
- Avvertenze di sicurezza 36
- Descrizione dell apparecchio 36
- Elementi forniti fig 1 5 36
- Caratteristiche tecniche 37
- Utilizzo proprio 37
- Prima della messa in esercizio 38
- Uso come sega per legno plastica 39
- Sostituzione del cavo di alimentazione 41
- Trasporto fig 1 3 41
- Uso come sega per metallo 41
- Pulizia manutenzione e ordinazione dei pezzi di ricambio 42
- Smaltimento e riciclaggio 42
- Innehållsförteckning 43
- Beskrivning av maskinen 44
- Leveransomfattning bild 1 5 44
- Säkerhetsanvisningar 44
- Tekniska data 45
- Ändamålsenlig användning 45
- Innan du använder maskinen 46
- Såga virke plastmaterial 47
- Byta ut nätkabeln 49
- Rengöring underhåll och reservdelsbeställning 49
- Skrotning och återvinning 49
- Såga metall 49
- Transport bild 1 3 49
- Inhoudsopgave 50
- Beschrijving van het toestel 51
- Omvang van de levering fig 1 5 51
- Veiligheidsinstructies 51
- Reglementair gebruik 52
- Technische gegevens 52
- Vóór ingebruikneming 53
- Gebruik als hout plasticzaag 54
- Gebruik als metaalzaag 56
- Reiniging onderhoud en bestellen van wisselstukken 56
- Transport fig 1 3 56
- Vervangen van de netaansluitkabel 56
- Afvalverwijdering en recyclage 57
- Índice de contenidos 58
- Descripción del aparato 59
- Instrucciones de seguridad 59
- Volumen de entrega fig 1 5 59
- Características técnicas 60
- Uso adecuado 60
- Antes de la puesta en marcha 61
- Funcionamiento como sierra para cortar madera o plástico 63
- Funcionamiento como sierra para cortar metal 64
- Cambiar el cable de conexión a la red eléctrica 65
- Eliminación y reciclaje 65
- Mantenimiento limpieza y pedido de piezas de repuesto 65
- Transporte fig 1 3 65
- Sisällysluettelo 66
- Laitteen kuvaus 67
- Toimituksen laajuus kuvat 1 5 67
- Turvallisuusmääräykset 67
- Määräysten mukainen käyttö 68
- Tekniset tiedot 68
- Ennen käyttöönottoa 69
- Käyttö puu muovisahana 70
- Kuljetus kuvat 1 3 72
- Käyttö metallisahana 72
- Käytöstäpoisto ja uusiokäyttö 72
- Puhdistus huolto ja varaosatilaus 72
- Verkkoliitäntäjohdon vaihto 72
- Sisukord 73
- Ohutusnõuanded 74
- Seadme kirjeldus 74
- Sihipärane kasutamine 74
- Tarnekomplekt joonised 1 5 74
- Tehnilised andmed 75
- Enne kasutuselevõttu 76
- Töötamine puidu ja plastisaena 77
- Töötamine metallisaena 78
- Jäätmekäitlus ja taaskasutus 79
- Puhastus hooldus ja varuosade tellimine 79
- Toitejuhtme vahetamine 79
- Transportimine joonised 1 3 79
- Περιεχόμενα 80
- Περιγραφή της συσκευής 81
- Συμπαραδιδόμενα εικ 5 81
- Υποδείξεις ασφαλείας 81
- Ενδεδειγμένη χρήση 82
- Τεχνικά χαρακτηριστικά 82
- Πριν τη θέση σε λειτουργία 83
- Λειτουργία σαν πριόνι για ξύλο πλαστικό 85
- Λειτουργία σαν πριόνι για μέταλλο 86
- Αντικατάσταση καλωδίου σύνδεσης με το δίκτυο 87
- Καθαρισμός συντήρηση και παραγγελία ανταλλακτικών 87
- Μεταφορά εικ 1 3 87
- Διάθεση στα απορρίμματα και επαναχρησιμοποίηση 88
- 108 ec 89
- 14 ec_2005 88 ec 89
- 32 ec_2009 125 ec 89
- 396 ec_2009 142 ec 89
- 404 ec_2009 105 ec 89
- 686 ec_96 58 ec 89
- Anleitung_rt_xm_305_u_spk7 _ 14 3 012 14 36 uhr seite 89 89
- Annex iv 89
- Annex v annex vi 89
- Isc gmbh eschenstraße 6 d 94405 landau isar 89
- Konformitätserklärung 89
- Landau isar den 14 2 012 89
- Standard references en 61029 1 en 61029 2 9 en 13898 en 55014 1 en 55014 2 en 61000 3 2 en 61000 3 3 89
- Universal kappsäge rt xm 305 u einhell 89
- Anleitung_rt_xm_305_u_spk7 _ 14 3 012 14 36 uhr seite 93 93
- T guarantee certificate 94
- P bulletin de garantie 95
- C certificato di garanzia 96
- U garantibevis 97
- N garantiebewijs 98
- M certificado de garantía 99
- Q takuutodistus 100
- Garantiitunnistus 101
- Z εγγυηση 102
- Isc gmbh eschenstraße 6 94405 landau isar deutschland 103
- K garantieurkunde 103
- Anleitung_rt_xm_305_u_spk7 _ 14 3 012 14 36 uhr seite 104 104
- Service hotline 01805 011 843 www isc gmbh info mo fr 8 00 18 00 uhr 104
Похожие устройства
- LG GA-B379BQA Инструкция по эксплуатации
- Viconte VC-436 Инструкция по эксплуатации
- Einhell RT-SM 430 U Инструкция по эксплуатации
- Liebherr CN 3503-21 Инструкция по эксплуатации
- Viconte VC-435 Инструкция по эксплуатации
- Einhell RT-SM 305 L Инструкция по эксплуатации
- Liebherr SBSes 7165-21 Инструкция по эксплуатации
- Viconte VC-433 Инструкция по эксплуатации
- Liebherr WTb 4212-20 Инструкция по эксплуатации
- Viconte VC-431 Инструкция по эксплуатации
- Liebherr WKt 5552-20 Инструкция по эксплуатации
- Viconte VC-314 Инструкция по эксплуатации
- Vestfrost VD 864 RX SB Инструкция по эксплуатации
- Siemens KG49NS50RU Инструкция по эксплуатации
- Viconte VC-313 Инструкция по эксплуатации
- Vestfrost VD 864 RB SB Инструкция по эксплуатации
- Zanussi ZDTS105 Инструкция по эксплуатации
- Liebherr CBNesf 5113-21 Инструкция по эксплуатации
- Vestfrost VD 864 RW SB Инструкция по эксплуатации
- Zanussi ZDV12001FA Инструкция по эксплуатации