Nissan Note [2/16] Precautions

FSU-2

PRECAUTIONS

PFP:00001

Precautions for Procedures without Cowl Top Cover

BES0002E

When performing the procedure after removing cowl top cover, cover

the lower end of windshield with urethane, etc.

Precautions for Brake System

BES0002F

● Recommended fluid is brake fluid “Nissan Genuine Brake Fluid

or DOT 3 or DOT4 (US FMVSS No.116)”.

● Never reuse drained brake fluid.

● Be careful not to splash brake fluid on painted areas; it may

cause paint damage. If brake fluid is splashed on painted areas,

wash it away with water immediately.

● Use flare nut wrench when removing flare nuts, and use a flare

nut torque wrench when tighten flare nuts.

● Always tighten brake lines to the specified torque when install-

ing.

Cautions

BES0002G

● When installing rubber bushings, final tightening must be carried out under unladen conditions with tyres

on flat, level ground. Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.

● “Unladen condition” means that fuel, coolant and lubricant are full and ready for drive. However, spare

tyre, jack, and hand tools should be unloaded.

● After installing the removed suspension parts, always check wheel alignment and adjust if necessary.

● Replace the caulking nut with a new one. Install a new nut without wiping the oil off before tightening.

PIIB3706J

SBR820BA