Planta TM-M50 [28/31] Installing and replacing the battery

Installing and replacing the battery

Detach the monitor from the holder. Flip it. Pry up the notch at the top of the battery cover.

Install or replace the 1.5V AA 1pc battery with a new one. Put the cover back and put the

monitor back in place.

Lubricating the Treadmill Belt and Base

This treadmill comes with the base and belt already lubricated. The degree of friction between the

treadmill belt and the base greatly affects the life time and efficiency of the treadmill. So it needs to

be lubricated regularly.

We recommend lubricating the treadmill belt according to the following scheme:

● Light weight users (less than 3 hours per week use) once a month

● Heavy weight users (more than 7 hours per week use) every two weeks

Check if necessary lubrication can be done by lifting one side of the walking belt and running your

hand over the central part of the base. If it is smooth and "slips", then lubrication is not required. If

the surface is dry and rough, it is necessary to lubricate the running belt by following the steps

below:

1) Gently lift the edge of the running belt on one side and add 5-10 ml of lubricant.

2) Do the same on the other side of the running belt.

3) Get on the treadmill and walk at a slow pace for 3 to 5 minutes, so that the lubricant is

evenly distributed over the entire surface.