![Zotek ZT-303 [21/27] Loosen the four screws on the back cover and](/img/pdf.png)
Zotek ZT-303 [21/27] Loosen the four screws on the back cover and
![Zotek ZT-303 [21/27] Loosen the four screws on the back cover and](/views2/1893228/page21/bg15.png)
2. Loosen the screw on the battery door and
remove the battery door.
3. Replace the used batteries with new batteries
of the same type.
4. Place the battery door back and fasten the
screw.
Replace the Fuses
When a fuse is blown or do not work properly, it
shall be replaced as below:
1. Remove the test leads and turn off the product
before replacing the fuse.
2. Loosen the four screws on the back cover and
the screw on the battery door, then remove the
battery door and the back cover.
3. Replace the fuse with a new fuse of the same
type.
4. Place the back cover and the battery door
back and fasten the screws.
17
Содержание
- User manual 1
- And limitation of liability 2
- Customers enjoy one year warranty 2
- Disposable batteries damage from 2
- Limited warranty 2
- Lcd display 3
- Measurements instruction 0 3
- Table of contents page 3
- Test ncv 15 3
- Specifications 8 4
- Allowable measuring range 5
- Introduction 5
- Personal injury please read all safety information 5
- Rms a lcd display and a backlight 5
- Safety information 5
- To the line being measured do not touch the 6
- When the input is out of range 6
- Instrument overview 7
- ⑥ diode test 7
- Sinusoidal and nonsinusoidal ac 8
- ⑲ alternating current 8
- Backlight long push again to turn off or the 9
- Dc ma ac ma 9
- Selects alternate measurement modes on a 9
- Mode push the button for more than 2 10
- The product will store the present reading as 10
- Button when turning on the 11
- Power off press the select 11
- Turn off the product at this position 11
- Dc a from 199 9ma 12
- Duty cycle from 1 99 12
- Input terminal for the measurements of 13
- Measurements instruction 14
- The circuit to measure the voltage 14
- Measure resistance 15
- Touch the probes to the desired test points of 15
- Test diodes 16
- Turn the rotary switch to press select 16
- Display reading shows 17
- Three times to toggle to the capacitance mode 17
- Display 19
- Turn the rotary switch to press select 19
- Are qualified to do so and have the relevant 20
- Be replaced as below 20
- Clean the product 20
- Maintenance 20
- Loosen the four screws on the back cover and 21
- Of the same type 21
- Specifications 22
- 9mv 0 1mv 23
- Electrical specifications 23
- Mv 0 01mv 23
- 0 3 19 99kω 0 01kω 24
- Μa 0 μa 24
- Function range resolution accuracy 25
- Hz 0 hz 25
- Function range resolution accuracy 26
Похожие устройства
- Zotek ZT-102 Инструкция по эксплуатации
- Zotek ZT-M1 Инструкция по эксплуатации
- Zotek ZT-109 Инструкция по эксплуатации
- Zotek ZT-A6 Инструкция по эксплуатации
- Zotek ZT-98 Инструкция по эксплуатации
- Zotek ZT-100 Инструкция по эксплуатации
- Zotek ZT-101 Инструкция по эксплуатации
- Zotek ZT-C1 Инструкция по эксплуатации
- Zotek ZT-C2 Инструкция по эксплуатации
- Zotek ZT-C3 Инструкция по эксплуатации
- Zotek ZT-C4 Инструкция по эксплуатации
- Zotek ZT-S2 Инструкция по эксплуатации
- Yli Electronic YK-1068B Спецификация
- Zotek ZT-S3 Инструкция по эксплуатации
- Zotek ZT-S4 Инструкция по эксплуатации
- Zotek ZT-301 Инструкция по эксплуатации
- Yli Electronic YD-605 Спецификация
- Zotek ZT-302 Инструкция по эксплуатации
- Yli Electronic YM-280NT(LED) Спецификация
- Zotek VC15B+ Инструкция по эксплуатации