Sharp PN-V601 [9/64] Connecting peripheral equipment

Sharp PN-V601 [9/64] Connecting peripheral equipment
ENGLISH
7
E
Supplied Components
If any component should be missing, please contact your dealer.
111098 1 2 3 4 5 712
6
15
14
13 1716
Expansion Board
When the PN-ZB02 (optional)
is attached
Caution
• Besuretoturnoffthemainpowerswitchanddisconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Becarefulnottoconfusetheinputterminalwiththeoutput
terminal when connecting cables. Accidentally reversing
cables connected to the input and output terminals may
cause malfunctions and the other problems.
TIPS
• Imagesmaynotbedisplayedproperlydependingonthe
computer (video card) to be connected.
•
A screen with 1920 x 1080 resolution may not be displayed
correctlyonPCRGB.Inthiscase,checkthesettingsofyour
computer (video card) to verify that input signals conform to
specicationsofthismonitor.(SeeOperationGuide.)
• IfthereisacheckboxtodisableEDIDindisplaycontrol
panel,checkitwhenusingPCRGB.
• UsetheautomaticscreenadjustmentwhenaPCscreen
isdisplayedforthersttimeusingPCD-SUBorPCRGB,
or when the setting of the PC is changed. The screen is
adjusted automatically when SELF ADJUST in the OPTION
menu is set to ON.
•
If the audio output from the playback device is connected
directly to speakers or other devices, the video on the monitor
may appear delayed from the audio portion.
Audio should be played through this monitor by connecting the
playback device to the monitor’s audio input, and connecting
the monitor’s audio output to the speakers or other devices.
• Theaudioinputterminalsusedineachinputmodeare
factory-set as follows.
Input mode
Audio input terminal
(Factory setting)
PCD-SUB,PCDVI-D,PCRGB
Audio input terminal
AV DVI-D Audio1 input terminal
AV COMPONENT,
AV S-VIDEO, AV VIDEO
Audio2 input terminal
PC HDMI, AV HDMI PC/AV HDMI input terminal
1. PC/AV HDMI input terminal
• UseacommerciallyavailableHDMIcable(conformingto
the HDMI standard).
• SetHDMIofINPUTSELECTontheOPTIONmenu
according to the device to be connected.
• SelecttheaudioinputterminaltobeusedinPCHDMI
or AV HDMI of AUDIO SELECT on the OPTION menu.
WhenHDMIisselected,connectiontotheaudioinput
terminal is unnecessary.
2. PC D-sub input terminal
• WhenthePN-ZB02(optional)isattached,selecttheaudio
inputterminaltobeusedinPCD-SUBofAUDIOSELECT
on the OPTION menu.
3. Audio input terminal
• Useanaudiocablewithoutresistance.
• WhenthePN-ZB02(optional)isattached,settheaudio
input terminal used for each input mode in AUDIO
SELECT on the OPTION menu.
4. Audio output terminals
• Theoutputsoundvariesdependingontheinputmode.
• Thevolumeoftheoutputsoundcanbexedbysetting
AUDIO OUTPUT(RCA) on the OPTION menu.
• Itisnotpossibletocontrolthesoundoutputfromthe
audio output terminals with the AUDIO menu.
5. RS-232C output terminal
6. RS-232C input terminal
• YoucancontrolthemonitorfromaPCbyconnectinga
commercially available RS-232 straight cable between
these terminals and the PC.
•
WhenusingthePN-ZR01controlkit(optional)toperform
operation of multiple monitors with the remote control
unit, connect multiple monitors in a daisy chain using the
commercially available RS-232 straight cable. (See page 9.)
7. Control kit terminal
• ConnectstheremotecontrolsensorboxofthePN-ZR01
control kit (optional). (See page 9.)
Connecting Peripheral Equipment
Liquid Crystal Display Monitor: 1
Cable clamp: 2
Power cord
CD-ROM(UtilityDiskforWindows):1
Operation manual: 1
Protection cover: 4
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Содержание

Скачать