Maxwell MW-1183 BK [15/44] English

Maxwell MW-1183 BK [15/44] English
15
ENGLISH
CLEANING
Attention! The blades of the knives block (4,
15) and the chopping knife (12) are very sharp
and dangerous. Handle them very carefully!
Unplug the unit before cleaning.
Remove the installed container from the
motor unit (1).
Wipe the motor unit (1) and the gear (10)
with a soft slightly damp cloth and then wipe
them dry.
After processing of salty and sour products
the knives (4, 12, 15) must be rinsed with
water immediately.
While possessing products with strong dye-
ing properties (for instance, carrot or beet-
root), the attachments or the bowls can get
colored; wipe them with a cloth dampened in
vegetable oil.
Wash all removable parts with warm water
and neutral detergent, then rinse them and
dry thoroughly.
To avoid the early wear of the silicone gasket
of the knives block (4, 15) and to prevent the
seal failure do not dismantle the knives block
without necessity. If the knives block (4, 15)
is very dirty, remove it from the base (3, 14)
and then remove the silicone gasket from the
knives block. Wash all the parts with warm
water and neutral detergent, then rinse them
and dry thoroughly. Assemble it in reverse
order.
DO NOT IMMERSE THE MOTOR UNIT (1) AND
THE GEAR (10) INTO ANY LIQUIDS, DO NOT
WASH THEM UNDER WATER JET OR IN A
DISHWASHING MACHINE.
STORAGE
Clean and dry the unit thoroughly before tak-
ing it away for storage.
Do not wind the power cord around the motor
unit.
Keep the blender set away from children in a
dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender bowl assembled – 1pc.
Coffee grinder bowl assembled – 1 pc.
Chopper bowl assembled – 1pc.
Detachable cup assembled – 1pc.
Filter – 1 pc.
Pusher – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Power: 220 W
Maximal power: 600 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-1183.indd 15 20.02.2014 15:48:27
Скачать
Случайные обсуждения