Maxwell MW-1918 BK [10/48] English

ENGLISH

Using the unit

Before switching on the unit, make sure that the mains voltage corresponds to the voltage specified

on the housing of the unit.

• Before switching on make sure that the cooker is clean and dry.

• Set cookware in the center of the heating element.

Note: It is necessary to use cookware with bottom diameter a little less or a little more than hob

diameter (within some centimeters). You should also take into account that the thicker and smoother

the bottom the less power is used for cooking.

• Insert the plug into the socket, you will hear a sound signal.

• Switch on the unit by pushing the button (10), the operation indicator above the button will

light up, the cooling fan will switch on, and there will be one sound signal. The unit is ready

for operation.

Note: If there are no operations within 30 seconds, the unit enters standby mode, and you will

hear one sound signal.

Constant temperature mode

• Press the Temperature setting button (9) (200°С will be set by default), the corresponding

operation indicator will light up, and the operation time in this mode will be shown on the

display «1Н» (1 hour).

• Using

«–» «+»

buttons (8) you can set the heating temperature (120, 160, 180, 200°С), the

chosen temperature will be highlighted with a corresponding operation indicator (5), and each

pressing of the button will be accompanied by a sound signal.

• After 1 hour of operation this mode will switch off automatically, and the unit will enter the

ready mode.

Heating mode

• Press Temperature maintenance button (7) to switch on the food heating mode, the

corresponding operation indicator will light up, and «C0» will be shown on the display.

• After 2 hours of operation this mode will switch off automatically, and the unit will enter the

ready mode.

MW-1918.indd 10 06.02.2013 17:36:49