Maxwell MW-1918 BK [11/48] English

Maxwell MW-1918 BK [11/48] English
11
ENGLISH
Heating with preset power
Press
«–» «+»
buttons to choose one of preset power configurations. When pressing
«–»
, minimum
power P1 is automatically set, and by pressing
«+»
you can select higher power, maximum power is P9.
After 2 hours of operation this mode will switch off automatically, and the unit will enter the ready
mode.
Timer mode
The «Timer» mode allows to cook using the preset power (P1-P9) and setting necessary operation
time.
Press «Timer» button (6), cooking time «00» will be shown on the display. Set the necessary operation
time using
«–» «+»
buttons (8). You can set time with 1 minute step by a single pressing of buttons
«–» «+»
(8). If you press and hold one of the buttons, you can set time with 10 minutes step. You can
set timer for 99 minutes.
Overheat protection
For your safety the unit is equipped with overheat protection system. If the heated cookware is empty,
the overheat protection system will switch off the unit automatically. If you remove the cookware from
the cooker during cooking, the unit will switch off automatically.
In case the not suitable cookware is placed on the cooker or the unit was switched on without
cookware on it, the unit will make a sound signal every 2,5 seconds and turn off automatically after
50 seconds.
Clean and care
Never immerse the unit into water or other liquids.
Regularly clean the cooker’s operating surface.
Unplug the unit and let it cool down.
Do not use abrasive cleaners for cleaning of electric the unit, use non-abrasive soft cleaners
put on a sponge or on a soft cloth.
Storage
Clean the unit before taking it away for storage.
Wind the power cord.
Keep the unit away from children in a dry cool place.
Note: Use of the compartment on the unit rear side is not available for this model.
Troubleshooting
Improper unit usage is often the cause of damages or malfunctioning. If you consider that there is
something wrong with the unit, check possible causes in this table.
If you failed to solve the problem, contact the nearest authorized service center.
Failure Possible Cause
There is no sound
signal when
switching on
the unit, and the
display doesn’t
switch on.
Make sure that the unit is correctly connected to the mains.
Make sure that the mains socket is working properly.
MW-1918.indd 11 06.02.2013 17:36:49

Содержание