![FERM CSM1043 Руководство по эксплуатации онлайн [7/148] 783987](/img/pdf.png)
FERM CSM1043 Руководство по эксплуатации онлайн [7/148] 783987
![FERM CSM1043 Руководство по эксплуатации онлайн [7/148] 783987](/views2/2015739/page7/bg7.png)
7
EN
attempt to remove the saw from the work or
pull the saw backward while the blade is in
motion or kickback may occur. Investigate and
take corrective actions to eliminate the cause
of blade binding.
c) When restarting a saw in the workpiece, centre
the saw blade in the kerf and check that saw
teeth are not engaged into the material. If saw
blade is binding, it may walk up or kickback
from the workpiece as the saw is restarted.
d) Support large panels to minimise the risk of
blade pinching and kickback. Large panels tend
to sag under their own weight. Supports must
be placed under the panel on both sides, near
the line of cut and near the edge of the panel.
e) Do not use dull or damaged blades.
Unsharpened or improperly set blades
produce narrow kerf causing excessive
friction, blade binding and kickback.
f) Blade depth and bevel adjusting locking levers
must be tight and secure before making cut.
If blade adjustment shifts while cutting, it may
cause binding and kickback.
g) Use extra caution when making a “plunge
cut” into existing walls or other blind areas.
The protruding blade may cut objects that can
cause kickback.
Safety instructions guard
a) Check guard for proper closing before each
use. Do not operate the saw if guard does not
move freely and enclose the blade instantly.
Never clamp or tie the guard with the blade
exposed. If saw is accidentally dropped, guard
may be bent. Check to make sure that guard
moves freely and does not touch the blade or
any other part, in all angles and depths of cut.
b) Check the operation and condition of the
guard return spring. If the guard and the
spring are not operating properly, they must
be serviced before use. Guard may operate
sluggishly due to damaged parts, gummy
deposits, or a build-up of debris.
c)
Assure that the guide plate of the saw will not
shift while performing the “plunge cut” when the
blade bevel setting is not at 90°. Blade shifting
sideways will cause binding and likely kick back.
d) Always observe that the guard is covering the
blade before placing saw down on bench or
floor. An unprotected, coasting blade will cause
the saw to walk backwards, cutting whatever is
in its path. Be aware of the time it takes for the
blade to stop after switch is released.
Specific safety instructions
• Do not use misshaped or cracked blades.
• Regularly check the blades for damage. If
necessary, replace them.
• Only use blades recommended by Ferm.
• Never use a saw that has components missing
or a saw that is fitted with accessories which
were not supplied with the saw or which are not
recommended for use with the saw.
• Never exert sideways pressure on the blade to
bring it to a stop.
• Remove the plug from the plug socket before
checking whether the protective cover can
move freely and does not become stuck.
• Do not lock or clamp the protective cover.
• Do not use the saw without the protective cover.
• Before using the saw, check whether the
protective cover has been fitted.
• Always remove the plug from the plug socket
before removing the protective cover, replacing
the blade or when checking the saw and
carrying out maintenance work.
• A damaged power cord should only be replaced
by the manufacturer or a service agent.
• After use, the saw must be stored in such a way
that the blade cannot become damaged.
• Do not use abbrasive discs.
• Always wear a dust mask.
• Only use saw blades recommended (e.g saw
blades intended for wood shall have EN 847-1
approval).
• Always wear hearing protection.
• Only use blade diameter in accordance with the
marking label.
• Have a suitable, tested vacuum removal device
attached to the saw when working with woods
or materials that create dusts that may be
hazardous to health.
• When cutting plastics, avoid to overheat the
blade, avoid to melt the plastic!
• Be careful when handling the saw blades
as they are sharp and can cause injury. It is
recommended to wear protective gloves when
handling the saw blades.
• Beware when changing blades as they can
become hot during use. Allow the blade time
to cool before replacing.
• Always store the saw blades in a safe place.
Содержание
- Csm1043 csm1043 1
- Www ferm com 1
- Machine data 5
- Precision circular saw 5
- Safety instructions 6
- Assembly 9
- Operation 10
- Environment 12
- Maintenance 12
- Präzisionskreissäge 13
- Technische daten 13
- Warranty 13
- Sicherheitsvorschriften 14
- Gebrauch 19
- Montage 19
- Umwelt 22
- Wartung 22
- Garantie 23
- Precisie cirkelzaag 23
- Technische specificaties 23
- Veiligheidsvoorschriften 24
- Bij gebruik van verlengsnoeren gebruik uitsluitend een goedgekeurd verleng snoer dat geschikt is voor het vermogen van de machine de aders moeten een doorsnede hebben van minimaal 1 5 mm2 wanneer het verlengsnoer op een haspel zit rol het snoer dan helemaal af 28
- Controleer altijd of uw netspanning overeenkomt met de waarde op het typeplaatje 28
- De handgreep monteren afb 2 bevestig de handgreep 2 aan het metalen onderdeel van de machine zoals weergegeven in afb 2 draai de dopmoer 11 goed vast met gebruik van een moersleutel 28
- Elektrische veiligheid neem bij het gebruik van elektrische machines altijd de plaatselijk geldende veiligheids voorschriften in acht in verband met brandgevaar gevaar voor elektrische schokken en lichamelijk letsel lees behalve onderstaande instructies ook de veiligheidsvoorschriften in het apart bijgevoegde veiligheidskatern door 28
- Het apparaat onmiddellijk uitzetten bij storing in de netstekker netsnoer of snoerbeschadiging defecte schakelaar rook of stank van verschroeide isolatie 28
- Klasse ii apparaat dubbel geïsoleerd een geaarde stekker is niet noodzakelijk 28
- Montage 28
- Wanneer het netsnoer vervangen moet worden dan moet dat door de fabrikant of door haar vertegenwoordiger gedaan worden om veiligheidsgevaren te vermijden 28
- Wat u ook doet wees voorzichtig 28
- Ingebruikname 29
- Service en onderhoud 31
- Garantie 32
- Milieu 32
- Scie circulaire de précision 32
- Spécifications techniques 32
- Consignes de sécurité 33
- Assemblage 38
- Utilisation 38
- Environnement 41
- Garantie 41
- Service et entretien 41
- Datos técnicos 42
- Sierra circular de precisión 42
- Normas de seguridad 43
- Montaje 47
- Servicio y mantenimiento 50
- Dados da máquina 51
- Garantía 51
- Medio ambiente 51
- Serra de precisão circular 51
- Instruções de utilização 52
- Montagem 56
- Utilização 56
- Assistência e manutenção 59
- Ambiente 60
- Garantia 60
- Dati dell apparecchio 61
- Sega circolare di precisione 61
- Istruzioni di sicurezza 62
- Montaggio 66
- Utilizzo 66
- Assistenza e manutenzione 69
- Ambiente 70
- Garanzia 70
- Maskininformation 70
- Precisionscirkelsåg 70
- Säkerhetsföreskrifter 71
- Användning 75
- Montering 75
- Service underhåll 77
- Garanti 78
- Miljö 78
- Laitteen tiedot 79
- Tarkkuuspyörösaha 79
- Turvaohjeet 79
- Asentaminen 83
- Käyttö 84
- Huolto ja kunnossapito 86
- Ympäristö 86
- Maskindata 87
- Præcisionsrundsav 87
- Sikkerhedsinstruktioner 88
- Anvendelse 92
- Montering 92
- Garanti 95
- Miljø 95
- Service og vedligeholdelse 95
- Gépinformáció 96
- Precĺziós körfűrész 96
- Biztonsági előírások 97
- Használat 101
- Összeszerelés 101
- Garancia 104
- Környezetvédelem 104
- Szerviz és karbantartás 104
- Bezpečnostní pokyny 105
- Informac o stroji 105
- Přesná kotoučová pila 105
- Montáž 110
- Použití 110
- Servis a údržba 112
- Záruka 113
- Životní prostředí 113
- Informacje dotyczące urządzenia 114
- Precyzyjna pilarka tarczowa 114
- Instrukcje bezpieczeństwa 115
- Montaż 119
- Użytkowanie 119
- Ochrona środowiska 122
- Serwis i konserwacja 122
- Caracteristicile masinii 123
- Fierastrau circular de precizie 123
- Gwarancja 123
- Instructiuni de siguranta 124
- Montarea 128
- Utilizare 128
- Garantie 131
- Intretinere 131
- Ïëúôêôú â áè ùô ìë óëì 132
- Δισκοπρίονο ακριβείασ 132
- Ëá â áè ùëó ûê ïâè 133
- Συναρμολογηση 137
- Ãú ûë 138
- Ú è î è û óù úëûë 141
- Úôûù û ùô âúè ïïôóùô 141
- Áá ëûë 142
- Spare parts list 144
- 42 ec 2014 35 eu 2014 30 eu 2012 19 eu 2011 65 eu 147
- Declaration of conformity csm1043 precision circular saw 147
- En 62841 1 en 62841 2 5 en 55014 1 en 55014 2 en 61000 3 2 en 61000 3 3 en 60745 2 22 147
- Ferm lingenstraat 6 8028 pm zwolle the netherlands 147
- Zwolle 01 02 2021 h g f rosberg ceo ferm 147
Похожие устройства
- Metabo BS 18 Quick Инструкция по эксплуатации
- Metabo PowerMaxx BS 12 BL Инструкция по эксплуатации
- Xiaomi Buds 3T Pro Gloss (BHR5177GL) White Руководство по эксплуатации
- Xiaomi Buds 3T ProCarbon (BHR5275GL) Black Руководство по эксплуатации
- Рэмо К-572 Руководство по эксплуатации
- Рэмо К-562 Руководство по эксплуатации
- Harper HB-551 Lime Инструкция по эксплуатации
- Zelmer ZCK7616R RED Руководство по эксплуатации
- Hiper HG-Z5-1160 ZET Руководство по эксплуатации
- Hiper HG-Z5-1460 ZET Руководство по эксплуатации
- Рэмо BAS-2361 Руководство по эксплуатации
- Tp-Link Deco X20(1-Pack) AX1800 Инструкция по эксплуатации
- Apple AirPods Pro with MagSafe Charging Case (MLWK3) Руководство по эксплуатации
- Canyon 4 в 1 с технологией Qi (WS-404) Инструкция по эксплуатации
- Keenetic Orbiter Pro (KN-2810) Руководство по эксплуатации
- Keenetic Voyager Pro (KN-3510) Руководство по эксплуатации
- Рэмо BAS-2355 Руководство по эксплуатации
- Рэмо BAS-2357 Руководство по эксплуатации
- Рэмо BAS-2359 Руководство по эксплуатации
- Рэмо BAS-2358 Руководство по эксплуатации