KRAFT TCH-UMD8201W [36/76] Automatic washing machine

USER GUIDE

AUTOMATIC WASHING MACHINE

• Spin — program for extraction. Starts draining the water from the tank of the washing

machine, followed by pressing.

• Gargle + Spin — the program is used if you want to rinse the laundry separately and

then spin it at the recommended default speed.

• Hygiene 90 °C iis a program to achieve the maximum disinfecting effect with the help

of temperature exposure.

• ECO 40-60 — is able to clean normally soiled cotton laundry declared to be washable

at 40°C or 60°C, together in the same cycle. This programme is used to assess the

compliance with the regulation (EU) 2019/2023.

• Cotton cold, 30°C, 40°C, 60°C — wash at temperatures from 0°C to 60°C. The

most high-quality washing due to the use of different modes of movement of the

drum. For washing white and colored cotton and cotton fabrics (bed linen, pajamas,

shirts, underwear, etc.). The temperature regime should be chosen depending on the

degree of contamination of the linen. The greater the contamination, the higher the

temperature should be selected.

* Each washing program can be changed. You can independently set the temperature

and spin speed for the programs.

* The program execution time is indicated approximately. The actual program execution

time may be shorter / longer depending on the washing conditions (water pressure,

amount of laundry, etc.).

ADDITIONAL FUNCTIONS

«Protection from children»

Function is used to enable a special button lock that protects children from accidentally

changing the settings. All buttons except «On/Off» will be locked.

To turn on the child protection, hold the «Function» and «Delayed Start» buttons for 3

seconds to lock the control buttons, the corresponding indicator will light up. To cancel

the function, press and hold the same buttons again for 3 seconds.

Attention! The lock does not turn o automatically after the end of the washing

cycle!

Delayed start

The program allows you to postpone the start of washing and set it at the hours when it

is most convenient for you. To activate the function:

1.Set the programmer knob to the desired program (see the program table).

2.Select additional functions as desired or change the washing parameters.

3.By pressing the «Delayed Start» button, select the time setting 3h/6h/9h

4.Click on the «Start» button/Pause.» The washing machine will switch to standby

mode. Washing will start automatically after the programmed delay time has elapsed.