KRAFT TCH-UMD8201W [38/76] Cleaning and service

USER GUIDE

AUTOMATIC WASHING MACHINE

Pre-wash

An additional «Soaking» cycle before starting the main washing program. Use this

function to wash heavily soiled laundry.

Additional rinsing

An additional rinsing cycle for washing out detergent residues. Use this function if you

think that you need to rinse the laundry again (for example, if too much detergent has

been used). The cycle can be repeated several times.

Memory function. In case of a power outage, the washing machine remembers at

what stage of washing the shutdown occurred, and when the power supply is restored, it

will continue washing from the moment of stopping.

Protection

• During the spin, the clothes may be distributed in the drum in an undesirable way.

The machine is equipped with the function of automatic redistribution of laundry,

which is produced during the spin, after which the spin program continues.

• If the clothes are not distributed in the necessary way after performing the automatic

function of redistributing (shaking) the laundry, then in order to prevent increased

vibration of the washing machine, the discharge speed will be reduced.

• When the load of laundry into the machine is insignificant (less than 1 kg), the spin

mode can be automatically canceled. Due to the small amount of laundry, excessive

vibration may occur when pressing at high speeds, which it may cause the machine

to break down.

• The need to redistribute (shake) the laundry increases the duration of the washing

program.

ATTENTION! Make sure that the clothes are not trapped between the drum

doors and the lid of the washing machine. Use the appropriate type of detergent for

dierent washing temperatures to get the best eect with the least consumption

of water and electricity.

CLEANING AND SERVICE

Keep the washing machine and the door seal clean. Before washing, disconnect it

from the power supply!

1. The outside of the washing machine body can be wiped with a clean cloth soaked in

warm water with liquid detergent. Then wipe dry with a dry cloth.

2. Do not use sharp metal scrapers, caustic and abrasive cleaning agents, as they can

scratch the surfaces.

3. Do not use a high-pressure cleaner or steam jet cleaners, as penetrating moisture

can cause electric shock.

4. After cleaning, check that the power cord is not damaged. Then insert the plug firmly

into the wall outlet.