Home
Главная
Elica
Встраиваемые Индукционные Панели
NIKOLATESLA PRIME S BL/A/83
Руководство по эксплуатации Страница: 22

Elica NIKOLATESLA PRIME S BL/A/83 [22/360] Cleaning the metal grille

residue and ensure maximum hygiene levels.

For a more complete and in-depth clean, the bottom

collection channel can be completely removed.

●

Cleaning the metal grille:

The grille must be washed by hand with hot water and

neutral detergent, then dried thoroughly to prevent

oxidation.

EXTRACTOR FAN MAINTENANCE

● Cleaning the extractor fan :

For cleaning, use ONLY a cloth moistened with neutral

liquid detergents.

DO NOT USE CLEANING UTENSILS OR TOOLS!

Avoid the use of products containing abrasives. DO NOT

USE ALCOHOL!

●

Grease filter maintenance:

Traps grease particles generated by cooking.

Must be cleaned once a month (or when indicated by the

filter saturation indication system), with non-aggressive

detergents, either by hand or in the dishwasher at low

temperatures and in a short cycle. When cleaned in the

dishwasher, the metal grease filter may discolour, but its

filtering characteristics remain unchanged.

●

Ceramic activated carbon filter maintenance

(For Recirculating Version only):

Traps unpleasant odours generated by cooking. The

product comes with a set of odour filters.

The saturation of the odour filters can occur after

somewhat prolonged use depending on the type of cooking

and how regularly the grease filter is cleaned. The odour

filters can be thermally regenerated every 2/3 months in an

oven pre-heated to 200°C for 45 minutes. The correct

regeneration of the filter ensures that it can constantly filter

efficiently for 5 years.

Please note! Do not place the filters on the floor of the

oven but rather in a tray, positioned at an intermediate

height.

5. ASSISTANCE

TROUBLESHOOTING TABLE

Informative code Description Possible causes Solution

The command zone switches off

due to an excessively high tem-

perature

The temperature inside the elec-

tronic parts is too high

Wait for the hob to cool be-

fore reusing it

Container unsuitable Loss of magnetic properties Remove the pot

Communication problems

between the user interface and

induction module

No power supply to the module;

the power cable has not been

connected correctly or it is faulty

Disconnect the hob from the

electrical network and check

the connection

For all other error sig-

nals

Call customer service and report the error code

CUSTOMER SERVICE

Before contacting Customer Service

1. Check that the problem cannot be solved by consulting the points in "Troubleshooting".

2. Switch the device off and on again to see if the problem resolves itself.

If the fault persists after the above checks, contact the nearest Customer Service centre.

Elica NIKOLATESLA PRIME S BL/A/83 [22/360] Cleaning the metal grille

Содержание

Похожие устройства