Kuppersberg ECS 639 F [68/136] Child lock safety control

Kuppersberg ECS 639 F [68/136] Child lock safety control
TECHNICAL PASSPORT ENGLISH
Built - in c ooker
68
65
ENGLISH TECHNICAL PASSPORT
Built -in cooker
a safe temperature. It can also be used as an energy saving function if you want to
heat further pans, use the hotplate that is still hot.
When in Standby mode, if the surface of cooking zone is hot to touch, the letter
“H” and - will show in its heat setting indicator alternately.
USING LARGE HEATING AREA
-
CERAMIC HOB
Some of ceramic hob models might have one or several extended cooking zones
(Oval/Dual/Triple zone), these extended zones can provide larger cooking area and
additional heat. To active the extended zone, please follows below:
1. Turn on the hob by touch ON/OFF control button.
2. Select the cooking zone which has extended zones, by
touch the heating zone selection button of it. Then adjust
the heat setting of it, the central zone will switch on.
3. Touch the extended zone control button to active
extended heating element to get a large heating area.
Notes:
1. By continuous touch the control button, the extended
zone work at below consequence:
- Oval zone: Central-Oval-Central-Oval-Central zone…
- Dual zone: Central-Dual-Central-Dual-Central zone…
- Triple zone: “Central-Dual-Triple-Central-Dual-Triple-
Central zone…
2. When Oval Zone or Dual Zone active, the LED indicator of it will show heat
setting and “ alternately ; When Triple Zone active, the LED indicator of it will
show power setting and alternately.
Using Booster Function-Induction Hob
Some of induction hob models might have one or several cooking zones which
has Booster function. You can use the “Booster” function to boost power of relevant
cooking zone for a maximum power rating for 5 minutes.This function could reduce
the cooking time, which convenience for cooking when in hurry!
To use booster function when induction hob is working,
follows below:
1. Active the cooking zone you want to use booster
function.
Touch the heating zone selection control button to
select the cooking zone you want to use boost function.
2. Touch the Booster function control button ,
the heating zone indicator will show “b” and flashing for 5
seconds then stop flashing, then Booster function be
actived
Note:
1. When using booster function, if the other cooking zone in vertical direction
also working meanwhile power setting higher than level 2, programmer will
auto turn power setting of the other cooking zone to level 2.
2. After booster nish, the cooking zone will return to original setting.
Cancel the Booster function
1. Touching the heating zone selection control that you
wish to cancel the booster function
2. Touching the «Booster» control to cancel the
Booster function, then the cooking zone will revert to its
original setting.
-You can also cancel Booster function by turn off the
cooking zone.
FLExIBLE AREAS
-
INDUCTION HOB
Some of models might have one or several Flexible cooking areas. These
Flexible cooking areas can each be used as a single zone or as two independent
zones, accordingly to the cooking needs anytime.
Flexible areas are each made of two independent inductors that can be
controlled separately. When working as a single zone, a cookware is moved from
one zone to the other one within the exible area keeping the same power level of
the zone where the cookware originally was placed, and the part that is not covered
by cookware is automatically switched off.
66
TECHNICAL PASSPORT ENGLISH
Built -in cooker
Important: Make sure to place the cookwares centered on the single cooking
zone. In case of big pot,oval,rectangular and elon- gated pans make sure to place
the pans centered on the cooking zone covering both cross.
the pans centered on the cooking zone covering both cross.
Active the exible induction area
To activate a exible area as a single big zone, rst press either of the two
cooking zone selection buttons of this exible area, then press the
exible area control button. When exible area works, the indicator above
corresponding exible area control button lighting, the power level indicator
ashing, you can adjust power level of the exible area by slide the slider.
Inactive the exible induction area
To in active the exible area when it works, press either of the two cooking zone
selection buttons of this exible area, when power level indicator ashing, press
the exible control button again. The indicator will off after inactive it.
CHILD LOCK SAFETY CONTROL
 You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on) by active Child Lock function.
 When the controls are locked, except the ON/OFF control button and Child
Lock control button, all other touch control buttons are disabled.
To lock the controls
Touch the Child Lock control button once . The timer indicator will show
Lo, and Child Lock function be active.
To unlock the controls
1. Make sure the electric hob is turned on.
2. Touch and hold the Child Lock control button for 3 seconds, the buzzer
beeps once and “Lo disappears in timer indicator, the Child Lock be inactive.
3. You can now start using your electric hob.
Under the child lock mode, all controls button are disable except the ON/OFF
and child lock .
You can always turn the hob off with the ON/OFF control in an emergency,
but you shall unlock the hob rst in the next operation
Note: Under Child Lock function, if turn the hob off without inactive the Child
Lock function. When turn on the hob later, the Child Lock function will still valid.
Stop & Go function
 Make cooking easy! When cooking, your doorbell rings, phone rings, or kid
shouts from another door. Need to step out of kitchen? These means dinner could
burn, or take longer time to ready if you switch everything off.
 The Stop & Go function can turn off all zones.When you back, with one more
touching of the button
, hob restarts where they were, to carry on cooking.
1. Active Stop & Go function
To active Stop & Go function, you can press the Stop & Go function button once.
Then all programmer setting be hold on and hob stop heating, all heat setting
indicators show “P”.
2. Inactive Stop & Go function
To cancel Stop & Go function, you can press the Stop & Go function again, after
come back. Then all programmer setting will return to what they were, Stop & Go
indicator “P” disappear from all indicators.
When Stop & Go function active, all control buttons are disable except the ON/
OFF and Stop & Go button.
Note: The hob will auto turn off, if Stop & Go function last more than 10 minutes.
USING THE TIMER
You can use the timer in two different ways:
 You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
 You can set it to turn either or more than one cooking zones off.
 You can set the minute minder/timer for up to 99 minutes.

Содержание

Скачать