Kuppersberg ECS 639 F [72/136] Touch control models

Kuppersberg ECS 639 F [72/136] Touch control models
TECHNICAL PASSPORT ENGLISH
Built - in c ooker
72
69
ENGLISH TECHNICAL PASSPORT
Built -in cooker
Timer overview
Minute display
shows the number
of minutes
Timer control
Using the Timer as a Minute Minder
If you have not selected any cooking zones
1. Make sure the hob is turned on.
2. Touch the timer control button , the number in timer
indicator ashing.
3. Then adjust Minute Minder setting
1) Touch control models:
 Set heat setting by touching the or button.
 If press and hold either of the two buttons, the value
will adjust down or up rapidly in circle.
Note: When the timer indicator ashing,touch timer control
button another time, can quick conrm the timer setting.
2) Slider Touch control models:
 Touch the timer control button once, the number of single digit in
timer indicator ashing, then adjust single digit of minute minder setting by sliding
the slider control.
 Press the timer control button again, the number of tens digit in timer
indicator ashing, then adjust tens digit of minute minder setting by sliding the
slider control.
Note: By continuous touch the timer control button, the slider works at below
consequence: “Single Digit-Tens Digit-Conrm Setting -Single Digit-
Note: After adjusting, the setting in timer indicator will ash for 5 seconds and
then stop ashing, then the setting be conrmed.
Note: The default setting of Minute Reminder is 30 minutes.
4. When the minute minder is set, it will begin to count down
immediately, the display will show the remaining time.
5. Buzzer will beep for 30 seconds and timer indicator shows
- - “when the setting time nished. Any efcient touching of
control buttons during it, would end up the buzzer beeps.
Setting the timer to turn cooking zone off
1. Touch the heating zone selection control button to select the
cooking zone you wish to set timer for.
2. Touch the timer control button , the number in timer
indicator ashing.
3. Then adjust Minute Minder setting
1) Touch control models:
 Set heat setting by touching the
or
button.
 If press and hold either of the two buttons, the value will
adjust down or up rapidly in circle.
Note: When the timer indicator ashing, touch timer control
button another time, can quick conrm the timer setting.
2) Slider Touch control models:
 Touch the timer control button ,once, the number of single digit in
timer indicator ashing, then adjust single digit of minute minder setting by sliding
the slider control.
 Press the timer control button again, the number of tens digit in timer
indicator ashing, then adjust tens digit of minute minder setting by sliding the
slider control.
70
TECHNICAL PASSPORT ENGLISH
Built -in cooker
Note: By continuous touch the timer control button, the slider works at below
consequence: “Single Digit-Tens Digit-Conrm Setting -Single Digit-
Note: After adjusting, the setting in timer indicator will ash for 5 seconds and
then stop ashing, then the setting be conrmed.
Note: The default setting of timer is 30 minutes.
4. When the timer is set, it will begin to count down
immediately, the display will show the remaining time.
NOTE: The red dot next to power level indicator will
illuminate for those zones be set with timer. You can check
timer setting of different cooking zone which set with timer, by
press corresponding cooking zone select button.
NOTE: If more than one heating zone has timer setting, the
timer indicator will show the lowest time. The red dot next to
power level indicator will ash.
5. When cooking timer expires, the corresponding cooking
zone will be switch off automatically.
Note: The minute reminder and timer can be use at same time, the timer indicator
will show the lowest time setting. If the lowest setting is minute reminder, the red
dot next to timer indicator will ash. If the lowest setting is timer setting, the red
dot of corresponding cooking zone power level indicator will ash.
Note: If indicator shows timer setting of cooking zone.To check minute reminder
setting, press the timer control button
, the indicator will show minute
reminder setting.
DETECTION OF PAN AND SMALL ARTICLES
For induction hob, if the display ashes“ alternately with heat
setting.
 you have not placed a pan on the correct cooking zone or,
 the pan you’re using is not suitable for induction cooking or,
 the pan is too small or not properly centered on the cooking zone.
Notes:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2.The display will auto turn off after 2 minutes if no suitable pan is placed on it.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other
small item (e.g. knife, fork, key) has been left on the hob, the hob automatically go
to standby in 1 minute. The fan will keep cooking down the induction hob for a
further 1 minute.
Residual Heat Warning
When the hob has been operating for some time, there will
be some residual heat. The letter H appears to warn you to
keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times as below table:
Power level 123456789
Default working timer (hour) 8 8 8 4 4 4 2 2 2
Over-heat Protection
A temperature sensor equipped can monitor the temperature inside the hob.
When an excessive temperature is monitored, the hob will auto stop operation.
Over-ow Protection
For your safety, the programmer will auto shut off the power if liquid boiling or
wet cloth over touch control panel. All control buttons became invalid except ON/
OFF and Child Lock button, unless you wipe the touch control area dry.
COOKING GUIDELINES
Cooking Tips
 When food comes to the boil, reduce the power setting.
 Using a lid will reduce cooking times and save energy by retaining the heat.
 Minimize the amount of liquid or fat to reduce cooking times.
 Start cooking on a high setting and reduce the setting when the food has
heated through.

Содержание

Скачать