Home
Главная
Tc Electronic
Cd-Проигрыватель
G-MAJOR
Инструкция по эксплуатации Страница: 16

Tc Electronic G-MAJOR [16/52] Preset handling i o setup

Store

To store a preset with the same name:

• Press STORE.

If the preset you are about to store is a

Factory preset the G•Major suggests the first

available User location but you can select

any of the 100 locations using the EDIT

wheel. If the preset you are about to store is

a User preset, the G•Major suggests the

current location of the preset.

You can, however, store at any of the 100

User locations. Select location using the

EDIT wheel.

• Press ENTER twice to confirm store

operation.

To rename a preset while storing:

• Press STORE. If the preset you are about to

store is a Factory preset the G•Major

suggests the first available User location but

you can select any of the 100 locations using

the EDIT wheel. Press ENTER once.

• Select storing location using the CONTROL

EDIT wheel.

• To alter the preset name; use the

PARAMETER wheel to move cursor and the

EDIT wheel to select character.

• Press ENTER twice to store the preset with

the new name.

Presets Backup Via MIDI

The User bank can be dumped for backup via

MIDI to either a sequencer or another G•Major.

This is how to do it:

• Connect G•Major MIDI Out to MIDI In on

either another G•Major or sequencer.

• Enter the Utility menu by pressing the

MIDI/UTIL key and scroll to select “Bulk

Dump” using the CONTROL

PARAMETER wheel.

• If connected to another G•Major simply press

ENTER and the entire User bank will be

copied to the other G•Major.

• If connected to a sequencer let the

sequencer record in OMNI mode (all channels)

and press ENTER on the G•Major.

The G•Major is always ready to receive a

MIDI Bulk Dump.

Simply connect MIDI Out from the device you

are dumping from to MIDI In on the G•Major. If

you are dumping from a sequencer, simply play

the sequence holding the BULK information. If

dumping from a G•Major - see above!

I/O Setup

In the I/O menu you will find all I/O related

parameters such as Input/Output settings,

analog/digital, Status Bit and Dither. For any

successful operation of the G•Major these

parameters must be correctly set!

All parameters in the I/O menu are “”general”

parameters that are not stored with the presets.

Basic Operation

• Press I/O

• Select parameters using the PARAMETER

wheel in the Control Section.

• Change values using the EDIT wheel.

Input

Select between Analog and Digital.

Analog Input

When "Analog" is selected the G•Major

automatically defaults to the internal 44.1kHz

clock as Sample Rate.

Digital Input

When "Digital" is selected the G•Major attempts

to lock to the S/PDIF Input. During the lock-up

period the LOCK icon blinks indicating none or

unacceptable clock, and the Outputs are

muted.

When lock is achieved the LOCK icon turns

solid, and the Outputs are un-muted.

Clock

Analog Input

When Input source is analog the following

Sample Rates are available:

Internal 44.1kHz : The G•Major runs at

internal 44.1kHz.

Internal 48kHz : The G•Major runs at

internal 48kHz.

Digital : The G•Major locks to the

incoming Digital clock.

Digit

al Input

When Input Source is digital the following