Thomas TWIN T2 PARQUET [18/83] Sucking up liquids
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Thomas TWIN T2 PARQUET [18/83] Sucking up liquids

Thomas TWIN T2 PARQUET [18/83] Sucking up liquids
18
Sucking up liquids
Information for use
You can suck up spilled, non-hazardous liquids on water basis
(for example water, coffee, etc.) with the THOMAS TWIN T2
PARQUET.
• Caution! Petrol, thinners, heating oil, etc., can develop explosive
vapours and mixtures when mixed with the intake air.
• Acetone, acids and solvents can attack the materials used in the
production of the appliance. Clean and dirty water can be sucked
up without any hesitation.
• Clean and dry the dirty water tank and all the parts used after
sucking up liquids.
• Never suck up liquids without the dirty water tank.
• Your THOMAS TWIN T2 PARQUET is not suitable for sucking up
larger quantities of liquid from containers or basins.
• Caution! Never operate the pump without liquid.
• Empty and clean the appliance every time it is used for wet
cleaning. Dirty water and moist parts propagate the growth of
bacteria and fungi (see cleaning and maintenance instructions).
Put together 2-piece anti-swash insert.
Pull out the AQUAFILTER from the dirty water tank by means
of the grip and insert anti-swash insert.
Remove HEPA filter from the appliance.
Insert the anti-swash insert and dirty water tank in the
appliance. Make sure that both the wet filter (13a) and the
motor protection filter (15) are fitted.
Connect up suction hose.
Choose a suitable nozzle and fit it on the suction pipe or hand grip,
respectively.
Pull out the mains plug from the appliance and connect up to the
power supply.
Switch on the appliance and set for maximum suction power.
Make sure that the mechanical suction power controller (26) is com-
pletely closed.
Hold the suction tube and hose upwards at an angle for a few
seconds while the motor is still running to prevent the liquid still in the
suction tube for running back into the appliance during a break in use.
Switch off the appliance afterwards.
The float in the dirty water tank automatically interrupts the
sucking up operation when the dirty water tank is full (this you
can clearly hear this from the higher running speed of the
motor). Switch off appliance, disconnect the mains plug and
empty the dirty water tank.
Cleaning and care
Only carry out cleaning and servicing operations with the appliance
switched off and disconnected mains plug.
After sucking up liquid
Please use a moist soft cloth to clean the housing. Do not use
any scouring cleaning agent or solvent.
Empty the dirty water tank.
Wash the anti-swash insert, dirty water tank and wet filter with
clean and possibly warm water.
Check the motor protection filter for contamination and,
if necessary, clean under flowing water and renew when
necessary.
Always keep the float (13b) in the dirty water tank clean and
serviceable. It interrupts the sucking operation when the dirty
water tank is full.
Dry any spray water in the suction space with a soft cloth.
Remove any dirt on the intake connection and on the inside of
the housing cover.
• The housing cover can be removed from the appliance to make
cleaning easier.
To do this open the cover and swing up vertically. Press the cover
forwards until it slides out of the hinge. Afterwards lift off the cover
upwards.
• Insert the housing cover vertically and close to lock it in position.
The cover automatically engages in the hinge.
Dry the appliance and accessory parts thoroughly after cleaning.

Содержание

Похожие устройства

Скачать