Adaptec asr-5405 kit [62/116] Installing on solaris

sudo apt-get install build-essential

3. Insert and mount the driver disk (assuming the USB drive is /dev/sda1):

mount /dev/sda1 /mnt/usb

4. Install the DEB driver package (where xxxxx is the build number):

Ubuntu 11 and Ubuntu 12:

sudo dpkg -i

/mnt/usb/aacraid-1.2.1-xxxxx-Ubuntu11.10+12.04+12.04.1+12.04.2-all.deb

Ubuntu 14:

sudo dpkg -i /mnt/usb/aacraid-1.2.1-xxxxx-Ubuntu14.10-x86_64.deb

5. Reboot your computer to ensure the driver loaded correctly.

6. Continue with Managing Your Storage Space on page 65.

Installing on Solaris

To install the driver on Solaris:

1. Start your computer.

2. (Solaris 10 only) Check for any pre-existing Adaptec driver by running pkginfo SUNWaac in a

terminal window . If there is no pre-existing Adaptec driver on your computer, continue with [3]. If

an Adaptec driver is already installed on your computer, run pkgrm SUNWaac to remove it.

Caution: If your operating system currently boots from the Adaptec controller,

do not reset your computer after you remove the pre-existing Adaptec driver.

Instead, follow the steps in this section to install a new driver before rebooting

your computer.

3. Insert and mount the driver disk:

volcheck

4. Change to the driver installer directory:

Solaris 10:

cd /rmdisk/aacraid/DU/sol_210/i86pc/Tools

Solaris 11:

cd /rmdisk/aacraid/DU/sol_211/i86pc/Tools

5. Start the driver installer:

./install.sh -i

6. Remove the driver disk, then reboot your computer.

7. Continue with Managing Your Storage Space on page 65.

62Proprietary and Condential to PMC-Sierra, Inc., and for its customers.

Document No.: CDP-00310-01-A Rev. A, Issue

Serial Attached SCSI RAID Controllers Installation and User's Guide