![Robomow RC302 [11/58] Chapter 3](/img/pdf.png)
Robomow RC302 [11/58] Chapter 3
![Robomow TC500 [11/58] Chapter 3](/views2/1172599/page11/bgb.png)
10
Chapter 3 –
Planning Ahead
Getting your lawn ready for Robomow is rather simple. As every lawn is unique, we recommend
reading this chapter before starting to install the perimeter wire. Planning the wire route and
drawing a sketch of the lawn, including all obstacles and Base Station location, will make it easier
and will prevent mistakes during the setup.
Scan and watch Robomow setup & operation video.
Also available on Robomow website.
Please complete reading this “Planning Ahead” chapter before you start the setup. It will guide you in
nding the best locations for the Base Station, Power Box, and for the Perimeter Wire.
The Perimeter Wire functions is an “invisible wall” for Robomow. It sets the boundaries of lawn zones by
surrounding specic areas, as borders for the Robomow mowing. The Perimeter Wire is held to the ground by
small pegs, supplied with Robomow.
After set, the wire will becomes invisible under the growth of new grass. As soon as Robomow starts operating
a signal that runs along the Perimeter Wire keeps Robomow within its working zones and away from preset
demarcated areas.
3.1 Lawn Types: What does your lawn look like?
There are 3 basic types of lawns: Some lawns are combinations of
more than one type.
Your rst task is to determine which type is yours.
o Main Zone Only
Robomow will simply mow this lawn within its set boundaries.
o Main Zone + Sub-Zone(s)
Robomow will mow the Main Zone and will move automatically
to the Sub-Zone(s).
o Separated Zone
Robomow will mow each zone separately. Its movement
between zones is restricted. Thus, you will have to bring the
mower from the Main Zone to the Separated Zone every time
you want to mow it.
3.1.1 “Main Zone Only” Type Lawn
The “Main Zone Only” lawn consists of one whole area.
It has no Sub-Zones and no Separated Zones.
If you answer “yes” to all of the following questions,
your lawn is a “Main Zone Only” type lawn:
o Is your grass area one continuous zone?
o Are all areas of your lawn wide enough for
Robomow to navigate through effectively? (Min.
3 meters (10 ft.) wide at its narrowest point).
If your lawn does not match this description, read the next Sections to nd the style of your lawn.
If your lawn is “Main Zone Only”, you can skip to Section 3.3 of this chapter to determine the Base Station
location.
Main Zone
Main Zone
Main Zone
Sub Zone
Separated-Zone
At least 3 meters
(10 ft.) wide
Main Zone Only
Содержание
- Operation and safety manual 2
- Table of contents 3
- Chapter 1 4
- Important 4
- Introduction and safety 4
- 7 6 5 4 3 2 5
- Safety warnings precautions 5
- Warning decal definitions 5
- Robomow safety features 7
- Chapter 2 8
- Know your robomow 8
- What s in the box 8
- How robomow works for you 9
- Robomow features 10
- Chapter 3 11
- Lawn types what does your lawn look like 11
- Planning ahead 11
- Main sub zone with a narrow pass 12
- Main zone sub zone s type lawn 12
- Separated zone 12
- Separated zones type lawn 12
- A separated zone larger than 100 m² 1100 ft² 13
- A separated zone smaller than 100 m² 1100 ft² 13
- Base station location guidelines 13
- Select base station location 13
- Setups 13
- Types of separated zone 13
- At a corner 14
- External setup off the lawn perimeter 14
- Internal setup on the lawn perimeter 14
- Main zone 14
- Outside the lawn 14
- There are two types of external setup 14
- Objects inside 15
- Planning the perimeter wire layout 15
- Select power box location 15
- Slopes 15
- Distances from the edge pools ponds cliffs etc 16
- Interference with adjacent lawns 16
- Chapter 4 17
- Initial setup 17
- Perimeter wire setup 17
- Preparations 17
- Laying the perimeter wire 18
- Starting point perimeter wire at the base station area 18
- Important information 19
- Min 1 m 4ft 19
- Perimeter wire within the working area 20
- Main zone 21
- Min 50cm 21
- Sub zone 21
- Main zone 22
- Min 50cm 22
- Sub zone 22
- Fastening perimeter wire to the 23
- Ground 23
- Main zone 23
- Back at the base station completing the perimeter wire setup 24
- Connecting the power box 25
- Laying and fastening extension cable 25
- Placement and connection of the base station 25
- At the power box location 26
- Determining the perimeter switch location 27
- Laying out the perimeter wire 27
- Perimeter switch placing options 27
- Setup in a non base zone 27
- At the perimeter switch s location 28
- Chapter 5 30
- Preparing robomow 30
- No wire signa 31
- Peg bas 31
- Position 31
- Reposition base station 31
- Swap wires in plot connecto 31
- Area setting indicator 33
- Automatic operation 33
- Battery and charging indicator 33
- Chapter 6 33
- Day and time setting indicator 33
- Days of the week 33
- Inactive time setting indicator rain sensor 33
- Mower is in the base station indicator 33
- Mowing hours setting indicator 33
- Operating panel 33
- Red lit constantly low battery green blinking charging green lit constantly fully charged 33
- Robomow operation 33
- User error messages 33
- Chapter 6 34
- Robomow operation 34
- Basic settings 35
- Menu options 35
- Screen setting description options 36
- Screen setting description options 37
- Screen setting description options 38
- Screen setting description options 39
- Operation in a non base zone using a perimeter switch 40
- Robomow app settings 40
- Chapter 7 41
- Enable disable the automatic operation 41
- Event description 41
- Power box alerts 41
- Turn the buzzer on off 41
- Using the power box 41
- Chapter 8 42
- Charging 42
- Chapter 9 43
- General error codes 43
- Robomow error codes table 43
- Troubleshooting and user messages 43
- Display message probable cause event corrective actions 44
- Detailed error codes 45
- Display message probable cause event corrective actions 45
- Display message probable cause event corrective actions 46
- Display message description required action 47
- User messages 47
- Basic troubleshooting 48
- Display message description required action 48
- Problem encountered probable cause event corrective actions 48
- U090 u093 48
- Problem encountered probable cause event corrective actions 49
- Code description corrective action 50
- Description of no depart codes 50
- Anti theft disabling device pin code write down your 4 digit anti theft disabling device pin code refer here if you ever forget the code 51
- Chapter 10 51
- Product specification 51
- Rc304 rc308 rc312 51
- Robomow serial number 51
- _______________________ 51
- Chapter 11 52
- Maintenance and storage 52
- Maintenance of the blade 53
- Lightning storm 54
- Maintenance of the base station area 54
- Splicing the perimeter wire 54
- Accessories 55
- Chapter 12 55
- Chapter 13 56
- Robomow lawn care has never been so easy 56
- Tips for maintaining your lawn 56
- Always follow the safety instructions specified in this user manual 57
- C series limited warranty 57
- Warranty card 57
Похожие устройства
- Robomow RC302 Инструкция QuickStart
- Lenovo b5030, 59-430205 Инструкция по эксплуатации
- Robomow RC306 Инструкция по эксплуатации
- Robomow RC306 Инструкция QuickStart
- Lenovo b5030, 59-430218 Инструкция по эксплуатации
- Lenovo b5030, 59-430217 Инструкция по эксплуатации
- Robomow RL555 Инструкция по эксплуатации
- Robomow RL555 Инструкция QuickStart
- Lenovo b5030, 59-430203 Инструкция по эксплуатации
- Lenovo b5070, 59-435371 Инструкция по эксплуатации
- Robomow RL855 Инструкция по эксплуатации
- Lenovo b5070, 59-435821 Инструкция по эксплуатации
- Robomow RL855 Инструкция QuickStart
- Lenovo b5070, 59-435373 Инструкция по эксплуатации
- Lenovo b5070, 59-435372 Инструкция по эксплуатации
- Lenovo g5030, 80g0016nrk Инструкция по эксплуатации
- Lenovo g5030, 80g000xwrk Инструкция по эксплуатации
- Lenovo ideapad s2030, 59-436224 Инструкция по эксплуатации
- Lenovo ideapad s2030, 59-436222 Инструкция по эксплуатации
- Lenovo thinkpad x240, 20al00dmrt Инструкция по эксплуатации
Скачать
Случайные обсуждения