![Makita 4351CT — установка и использование адаптера направляющей для чистых резов [11/32]](/img/pdf.png)
Makita 4351CT — установка и использование адаптера направляющей для чистых резов [11/32]
![Makita 4351CT [11/32] Anti splintering device fig 27](/views2/1175526/page11/bgb.png)
11
Guide rail adapter set (accessory)
When cutting parallel and uniform width or cutting
straight, the use of the guide rail and the guide rail
adapter will assure the production of fast and clean cuts.
(Fig. 23)
To install the guide rail adapter, insert the rule bar into the
square hole of the base as far as it goes. Secure the bolt
with the hex wrench securely. (Fig. 24)
Install the guide rail adapter on the rail of the guide rail.
Insert the rule bar into the square hole of the guide rail
adapter. Put the base to the side of the guide rail, and
secure the bolt securely. (Fig. 25)
CAUTION:
• Always use blades No. B-8, B-13, B-16, B-17 or 58
when using the guide rail and the guide rail adapter.
Cover plate (Fig. 26)
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Anti-splintering device (Fig. 27)
For splinter-free cuts, the anti-splintering device can be
used. To install the anti-splintering device, move the tool
base all the way forward and fit it from the back of tool
base. When you use the cover plate, install the anti-splin-
tering device onto the cover plate.
CAUTION:
• The anti-splintering device cannot be used when mak-
ing bevel cuts.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
ita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Jig saw blades
• Hex wrench 4
• Rip fence (guide rule) set
• Guide rail adapter set
• Guide rail set
• Anti-splintering device
• Dust nozzle
• Cover plate
• Hose (For vacuum cleaner)
For Model 4351T
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-11:
Sound pressure level (L
pA): 85 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-11:
Work mode: cutting chipboard
Vibration emission (a
h,CW
): 7 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,CM
): 4.5 m/s
2
Uncertainty (K): 1.5 m/s
2
For Model 4351CT, 4351FCT
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-11:
Sound pressure level (L
pA): 85 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-11:
Work mode: cutting chipboard
Vibration emission (a
h,CW
): 6.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,CM
): 4.5 m/s
2
Uncertainty (K): 1.5 m/s
2
EC-DECLARATION OF CONFORMITY
Model;
4351T
,
4351CT, 4351FCT
ENH101-7
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000
in accordance with Council Directives, 2004/108/EC and
98/37/EC.
Tomoyasu Kato
CE 2006
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Содержание
- Символы p.6
- Symbole p.6
- Symbols p.6
- English p.7
- Specifications p.7
- Save these instructions p.7
- General safety rules p.7
- Explanation of general view p.7
- Use clamps or another practical way to secure and support the workpiece to a stable platform p.8
- Warning misuse or failure to follow the safety rules stated in this instruction manual may cause serious personal injury p.8
- Specific safety rules p.8
- Save these instructions p.8
- Do not let comfort or familiarity with product gained from repeated use replace strict adher ence to jig saw safety rules if you use this tool unsafely or incorrectly you can suffer serious personal injury 1 hold power tools by insulated gripping sur faces when performing an operation where the cutting tool may contact hidden wiring or its own cord p.8
- Always use safety glasses or goggles ordi nary eye or sun glasses are not safety glasses 4 avoid cutting nails inspect workpiece for any nails and remove them before operation 5 do not cut oversize workpiece 6 check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor workbench etc 7 hold the tool firmly 8 make sure the blade is not contacting the workpiece before the switch is turned on 9 keep hands away from moving parts 10 do not leave the tool running operate the tool only when hand held 11 always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece 12 do not touch the blade or the workpiece immediately after operation they may be extremely hot and could burn your skin 13 do not operate the tool at no load unneces sarily 14 some material contains chemicals which may be toxic take caution to prevent dust inhala tion and skin contact follow material sup plier safety data 15 always p.8
- For 4351fct only p.9
- Assembly p.9
- Switch action fig 2 p.9
- Speed adjusting dial fig 3 p.9
- Selecting the cutting action fig 1 p.9
- Lighting up the lamps p.9
- Installing or removing saw blade fig 4 5 6 p.9
- Functional description p.9
- Rip fence set optional accessory p.10
- Operation p.10
- Metal cutting p.10
- Hex wrench storage fig 7 p.10
- Front flush cuts fig 12 p.10
- Finishing edges fig 15 p.10
- Dust extraction p.10
- Cutouts p.10
- Circular cuts fig 21 22 p.10
- Bevel cutting p.10
- Straight cuts fig 19 20 p.10
- Maintenance p.11
- Guide rail adapter set accessory p.11
- For model 4351t p.11
- For model 4351ct 4351fct p.11
- For european countries only p.11
- Ec declaration of conformity p.11
- Ct 4351fct p.11
- Cover plate fig 26 p.11
- Ce 2006 p.11
- Anti splintering device fig 27 p.11
- Accessories p.11
- Technische daten p.12
- Diese anweisungen aufbewahren p.12
- Deutsch p.12
- Allgemeine sicherheitsregeln p.12
- Übersicht p.12
- Spezielle sicherheitsregeln p.13
- Wahl der schnittbewegung abb 1 p.14
- Schalterfunktion abb 2 p.14
- Hubzahl stellrad abb 3 p.14
- Funktionsbeschreibung p.14
- Bewahren sie diese hinweise sorgfältig auf p.14
- Randnahe schnitte abb 12 p.15
- Montage demontage des sägeblatts abb 4 5 u 6 p.15
- Montage p.15
- Inbusschlüssel aufbewahrung abb 7 p.15
- Gehrungsschnitte p.15
- Einschalten der lampen p.15
- Betrieb p.15
- Ausschnitte p.15
- Bearbeitung von kanten abb 15 p.16
- Wartung p.16
- Staubabsaugung p.16
- Schneiden von metall p.16
- Parallelanschlagsatz sonderzubehör p.16
- Führungsanschlagsatz zubehör p.16
- Zubehör p.17
- Nur für europäische länder p.17
- Ce konformitätserklärung p.17
- Ce 2006 p.17
- Zachowaj tę instrukcję p.18
- Wyjaśnienia dotyczące urządzenia i jego użycia p.18
- Polski p.18
- Ogólne zasady bezpieczeństwa p.18
- Dane techniczne p.18
- Szczegółowe zasady bezpieczeństwa p.19
- Działanie włącznika rys 2 p.20
- Zawsze używaj maski przeciwpyłowej respiratora właściwego dla obrabianego materiału i wykonywanej pracy p.20
- Zachowaj tę instrukcję p.20
- Wybór sposobu cięcia rys 1 p.20
- Pokrętło regulacji prędkości rys 3 p.20
- Opis działania p.20
- Zapalanie lampek p.21
- Zakładanie lub wyjmowanie brzeszczotu rys 4 5 i 6 p.21
- Wycięcia p.21
- Składanie p.21
- Przechowywanie klucza sześciokątnego rys 7 p.21
- Postępowanie p.21
- Cięcie ukośne p.21
- Urządzenie antyodpryskowe rys 27 p.22
- Płyta ochronna rys 26 p.22
- Konserwacja p.22
- Cięcie metalu p.22
- Zestaw prowadnicy wyposażenie dodatkowe p.22
- Zestaw adaptora prowadnicy wyposażenie p.22
- Wykańczanie brzegów rys 5 p.22
- Wyposażenie p.23
- Ue deklaracja zgodności p.23
- Tylko dla krajów europejskich p.23
- Szummy p.23
- Model 4351t p.23
- Model 4351ct 4351fct p.23
- Drgania p.23
- Ce 2006 p.23
- Русский язык p.24
- Технические характеристики p.24
- Сохраните эту инструкцию p.24
- Общие правила безопасности p.24
- Алюмини p.24
- Описание функционирования p.26
- Сохраните эти инструкции p.26
- Особые правила безопасности p.26
- Установка или удаление лезвия пилы рис 4 5 и 6 p.27
- Сборка p.27
- Регулятор переключения скорости рис 3 p.27
- Действия при переключении рис 2 p.27
- Высвечивание ламп p.27
- Эксплуатация p.28
- Хранение торцевого гаечного ключа рис 7 p.28
- Резка металла p.28
- Передние разрезы вровень рис 12 p.28
- Отделка краев рис 15 p.28
- Наклонная резка p.28
- Извлечение пыли p.28
- Вырезание p.28
- Установка направляющей планки дополнительная принадлежность p.29
- Стыковочная накладка рис 26 p.29
- Противорасщепляющее устройство рис 27 p.29
- Принадлежности p.29
- Набор направляющего держателя принадлежность p.29
- Ехническое обслуживание p.29
- Модель 4351t p.30
- Модель 4351ct 4351fct p.30
- Ес декларация соответствия p.30
- Ce 2006 p.30
Похожие устройства
-
Makita 4329Инструкция по применению -
Makita 4328Инструкция по применению
-
Makita 4327Руководство пользователя
-
Makita 4326Руководство по работе с устройством
-
Makita 4329Руководство по эксплуатации -
Makita 4326Инструкция по эксплуатации -
Makita 4326Инструкция по эксплуатации -
Makita 4327Инструкция по эксплуатации
-
Makita 4329Инструкция по эксплуатации
-
Makita 4350CTИнструкция по эксплуатации -
Makita 4351FCTИнструкция по эксплуатации -
Makita 4350FCT, 720 ВтИнструкция по эксплуатации
Узнайте, как правильно установить адаптер направляющей для достижения быстрых и чистых резов. Подробные инструкции и советы по использованию аксессуаров для резки.