Unit usp-1070 [4/33] English english
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Unit usp-1070 [4/33] English english

Unit usp-1070 [4/33] English english
ENGLISH ENGLISH
6 7
BEFORE USE
• Remove the packing materials from the inside and outside of the appliance and from the acces-
sories.
• Place the cooker on a flat dry surface.
• Wash all the parts, which may contact with the food including the Inner pot, the Measuring Cup,
the Ladle and the Steamer in warm soap water, rinse and dry.
• Wipe inside and outside of the appliance, and the Lid with the wet sponge and than with a clean
dry cloth.
• Before connecting the cooker to the supply, check the applicable voltage indicated on the appli-
ance to see whether it corresponds to that of the main supply (220-240 V, 50-60 Hz).
• Don’t dip the appliance into water or other liquid!
FIXING AND TAKING OFF THE LID
Taking off the lid:
• Put the appliance on a flat dry surface.
• Turn the Lid around her axis a clockwise direction until it stops and lift up.
• Unscrew the plug which is located under the handle of the Lid for a complete detaching of the
Lid (see pictures). Remove the Lid from the thread.
Fixing of the lid:
• Set the detached Lid on carving of handle exactly in the form of holes
• Put down the Lid and turn it counter-clockwise.
• It is important that the Lid has been turned completely during cooking, because there is blocked
valve inside of the Lid which, in another case, will not allow to start the cooking process.
APPLIANCE USE
1. Open the Lid turning it counter-clockwise to the clamping position and then lift it.
2. Take out the Inner Pot and fill in with the kitchen-stuff and water. Make sure the cooker must
never be filled more than 4/5 full or less than 1/5 full.
When cooking the kitchen-stuff that enlarge, do not fill in the pot more than 3/5 full.
Note: to cook the stuff evenly it’s necessary to dip it into the water.
3. Clean the Inner Coating and the Heating Plate with a slightly wet cloth before cooking: be sure
there are no foreign particles left in the Inner Coating or on the surface of the Heating Plate.
4. Take the Pot with kitchen-stuff and water inside carefully and put it into the appliance. Then turn
the Inner Pot slightly to fit it well with the Heating Plate.
5. Close the Lid: for this put the Sealing Gasket on the Inner Steel Ring. Make sure they are fitting
well (see the sketch on page 2)
Then close the Lid turning it clockwise till a sound of clamping is heard.
6. Fix the pressure Relief Valve in the position (“герметично”) as the picture shows.
Note: the Valve has two positions – “герметично” and “выпуск пара”.
7. Switch the power on - the display shows “00:00”. Now you should preset cooking parameters on
the panel.
Timer setting (skip this step if you don’t need to postpone the time of starting cooking).
Установка
времени
Time setting/Postponed
start timer setting
Cooking time set-
ting: the gap is 1
min; Postponed
start timer setting
– the gap is 30
mins
If you press it before any
other button – you will set
the postponed start timer; if
you press it after choosing
any cooking program – you
will set the time of cooking
Multi-Mode Cooking different dishes 18 Can set yourself time and
cook any dishes in this
mode.
has no post-
poned start
function. Put
the valve to the
“выпуск пара”
position.
Can set yourself
time and cook
any dishes in
this mode.
Пароварка Steam-cooking 15 Pour the water and put the
steamer inside

Содержание

Похожие устройства

Скачать