Moxa WAC-1001 [20/56] Basic wac settings

WAC-1001 Web Console Configureation

3-7

ATTENTION

Because the

current local time will be adjusted automatically as the time zone is being adjusted

, you will

need to configure the

time zone prior to inputting the current local time.

Daylight saving time

Setting Description Factory Default

Enable/ Disable Daylight saving time (also known as DST or summer time)

involves advancing clocks (usually 1 hour) during the summer

time to provide an extra hour of daylight in the afternoon.

Disable

When Daylight saving time is enabled, the following parameters will be shown:

• Starts at: The date that daylight saving time begins.

• Stops at: The date that daylight saving time ends.

• Time offset: Indicates how many hours forward the clock should be advanced.

Time server 1/2

Setting Description Factory Default

IP/Name of Time

Server 1/2

IP or Domain name of the NTP time server. The 2nd NTP server

will be used if the 1st NTP server fails to connect.

None

Query period

Setting Description Factory Default

Query period time

(1 to 9999 seconds)

This parameter determines how often the time is updated from

the NTP server.

600 (seconds)

Controller Settings

The Controller Settings group includes the most important settings, which enable administrators to set up the

WAC-1001’s services.

Basic WAC Settings

The Roaming method and the Roaming domain’s information are displayed on the Overview page.

Note: Using the Roaming method requires the input of different parameters. See below for details.

Roaming method: Compare