Moxa WAC-1001 [21/56] Wac 1001 web console configureation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa WAC-1001 [21/56] Wac 1001 web console configureation

Moxa WAC-1001 [21/56] Wac 1001 web console configureation
WAC-1001 Web Console Configureation
3-8
The tables below describe the Roaming method and Roaming domain’s parameters and options.
Alternatively, you may refer to Appendix A.
Inter WAC enable
Setting Description Factory Default
Enable/Disable Enable or disable the Inter WAC feature Enable
WAC group ID
Setting Description Factory Default
Max. of 31 characters
The group ID for WACs to recognize each other as a member of
the same WAC community, so that the inter-WAC feature will
operate properly
Moxa
WAC passphrase
Setting Description Factory Default
Max. of 63 characters
(masked)
The passphrase for inter WAC security and to prevent rouge
WACs
None
WAC group multicast IP
Setting Description Factory Default
Multicast IP The multicast IP address for inter-WAC communication 239.0.1.150
WAC mode
Setting Description Factory Default
Primary WAC Act as a primary WAC Primary WAC
Backup WAC Act as a backup WAC
Primary/Backup WAC IP address
Setting Description Factory Default
IP address The IP address of the pairing controller; when one fails, another
controller will take over its network function within 500 ms
None
Roaming domain
Setting Description Factory Default
6 Hex characters Specifies the area served by the WAC-1001. All related
controllers, APs, and clients use this as identification to work
and communicate with each other.
<The Mac address of
the WAC-1001>
Priority 1/2 roaming threshold
Setting Description Factory Default
Signal strength (dBm) The signal strength of the current AP and
Client must be lower
than this threshold.
Priority 1: -75
Priority 2: -55
Priority 1/2 roaming difference
Setting Description Factory Default
Relative value (dB) The signal strength between the target AP and Client must be
greater than this value
Priority 1: 0
Priority 2: 10
Priority 1/2 roaming link quality
Setting Description Factory Default
Link quality (Integer) The link quality (signal strength –
Background noise) between
the target AP and Client must be greater than this threshold.
Priority 1: 30
Priority 2: 20
Roaming stable interval
Setting Description Factory Default
Multiple of 50 ms
(Integer)
The above three conditions must stay true for X amount of time
to ensure a stable state.
3 (x 50 ms)

Содержание

Похожие устройства

Скачать