Moxa WAC-1001 [8/56] Attention

WAC-1001 Introduction

1-4

ATTENTION

The WAC

-1001 is NOT designed for use by the general public. A well-

trained technician is required to safely

deploy the WAC

-1001.

Functional Design

LED Indicators

The LEDs on the front panel of the WAC-1001 provide a quick and easy means of determining the current

operational status and wireless settings.

The FAULT LED indicates system failures and user-configured events. If the WAC-1001 cannot retrieve an IP

address from a DHCP server, the FAULT LED will blink at one second intervals.

Beeper

The beeper emits two short beeps when the system is ready.

Reset Button

The RESET button is located on the top panel of the WAC-1001. You can reboot the WAC-1001 or reset it to

the factory default settings by pressing the RESET button with a pointed object such as an unfolded paper clip.

• System reboot: Press and release the RESET button

• Reset to factory default: Depress the RESET button for more than 5 seconds until the STATE LED starts

blinking green, and then release.